freenect2-rs

Rust bindings for libfreenect2 (Kinect for Windows v2 / Kinect v2). The crate links against a system-installed libfreenect2 and a small C++ shim that exposes a C ABI.

Requirements

• Hardware: Kinect v2 and a working USB 3.0 setup (see upstream docs).
• Library: Install libfreenect2 with CMake (cmake --install or make install) so libfreenect2.so is on the system library path. Run sudo ldconfig after install if needed, then confirm with e.g. ldconfig -p | grep freenect2.
• Headers: This repo vendors headers under vendor/include/libfreenect2 for building the shim; they should match the installed library version when possible.
• Build: C++ toolchain, libclang for bindgen (e.g. Debian/Ubuntu: libclang-dev).
• Runtime: libusb and other dependencies your libfreenect2 build expects (e.g. libusb-1.0-0).

Usage

Add the dependency from crates.io:

[dependencies]
freenect2-rs = "0.1"

Minimal capture loop:

use freenect2_rs::{FrameFormat, Kinect};

fn main() -> Result<(), Box<dyn std::error::Error>> {
    let mut kinect = Kinect::open_first()?;
    let frames = kinect.wait_for_frame(10_000)?;

    assert!(matches!(
        frames.color_format(),
        FrameFormat::Bgrx | FrameFormat::Rgbx
    ));
    assert_eq!(frames.depth_format(), FrameFormat::F32Millimeters);

    let _color = frames.color_bytes();
    let _depth = frames.depth_bytes();
    Ok(())
}

• Kinect::open_first() — Creates a libfreenect2 context, opens device index 0, attaches a sync color+depth listener, and starts streaming.
• Kinect::wait_for_frame(timeout_ms) — Returns Frames<'_>, which borrows the Kinect mutably until it is dropped. You cannot call wait_for_frame again while a Frames value exists; dropping Frames releases buffers back to libfreenect2.
• FrameFormat — Describes color (typically BGRX/RGBX) and depth (F32Millimeters: f32 per pixel, millimeters).

For low-level access, see the raw module (bindgen output). It is unsafe and treated as semver-exempt relative to the safe API.

Layout

freenect2-rs/
├── Cargo.toml
├── build.rs                  # cc (shim) + bindgen + link libfreenect2
├── csrc/
│   ├── freenect2_shim.h
│   └── freenect2_shim.cpp    # C ABI around libfreenect2 C++ API
├── src/
│   ├── lib.rs                # crate root, re-exports
│   ├── kinect.rs             # safe `Kinect`, `Frames`, `FrameFormat`, …
│   └── raw.rs                # `include!` of generated `bindings.rs`
└── vendor/include/libfreenect2   # headers for building the shim

Build

With libfreenect2 installed and visible to the linker and dynamic loader (standard paths + ldconfig), no extra environment variables are required:

cargo build
cargo test

If the linker cannot find -lfreenect2, check that the install prefix’s lib directory is configured (e.g. /usr/local/lib in /etc/ld.so.conf or ld.so.conf.d/, then sudo ldconfig).

Tests

• test_create_destroy — Linkage smoke test (no device).
• test_capture_frame — Full open + one frame; #[ignore] by default (needs hardware):

  cargo test test_capture_frame -- --ignored

Troubleshooting

LIBUSB_ERROR_ACCESS / permission denied

You need a udev rule so your user can open the Kinect. libfreenect2 ships one:

sudo cp /path/to/libfreenect2/platform/linux/udev/90-kinect2.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules
sudo udevadm trigger

Unplug and replug the device after changing rules.

Check enumeration:

lsusb | grep -i microsoft
# e.g. Bus 002 Device 003: ID 045e:02c4 Microsoft Corp.

bindgen: Unable to find libclang

Install LLVM/Clang dev packages and, if needed, set LIBCLANG_PATH to the directory containing libclang.so (see bindgen docs).

Link or load errors for libfreenect2

• Link time: Ensure the library is installed under a directory the linker searches, or extend LIBRARY_PATH / toolchain defaults for your platform.
• Run time: Ensure the dynamic loader can find the .so (same as above; ldconfig -p | grep freenect2 is a good check on Linux).

Upstream licensing

libfreenect2 is licensed under Apache-2.0 / GPL-2.0 (dual). Linking this crate loads that library; comply with its terms for distribution.