Open
Conversation
* Enable FORITFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and SP for native builds meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes #7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 0847969. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Add check on polling interval of sen5x * Add missing serializer --------- Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
…ed after successful decoding (#9536)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil.
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Add sdl libs for native builds * Alpine try again
This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil.
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com>
#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats
* Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes #7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 0847969. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Add SFA30 with new sensor template in AQ module * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Final SFA30 class implementation * Add HCHO to screen and improve logs * Add metrics to mesh packet serializer * Minor fixes in logs * OCD tidy up of logs * Fix sleep function * Remove old I2C_CLOCK_SPEED code --------- Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* add heltec_mesh_node_t096 board. * Fixed the GPS reset pin comments. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Added compiles if NUM_PA_POINTS is not defined. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Correct the pin description. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Specify the version of the dependency library TFT_eSPI. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Adding fields missing from the .ini file. * Modify the screen SPI frequency to 40 MHz. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Reduce perms to least-necessary Remove merge_queue.yml since it's never been used and is now stale Remove comment-artifact, it hasn't worked in ages.
* fix cardputer sound * Add I2S BLEEBLEs * MenuHandler ifdefs * add generic tone -> I2S RTTTL conversion * not needed --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* preliminary io pin definitions * Update product link * Move to new variant structure and refactor inkHUD - Display does not work and SX1262 init fails on HT752-02 * update variant definitions * add EPD driver * fix lora, add v1/v2 variant targets * adapt pins for v1/v2 * alt button * add compile guards * use lilygo epd47 lib * workaround for INT ERR_NOT_FOUND * USE_EPD (e-ink parallel display) * use FastEPD driver * create screen * EInkParallelDisplay definition * setup screen * dispaly() implementation * enable touchscreen * rotate touch screen * refactor display buffer processing * provide local copy of TwoWire instance as the touch driver calls end() * use larger fonts * replace touch driver; enable debugging * replace touch driver; enable debugging * consider bitsremain == 0 * tryfix crash * fix button * update touch driver * set lora_cs pin * update touch driver and lib reference * add locks * limit Ghosting similar to EInkDynamicDisplay * workaround for FastEPD partial update bug (artifacts) * display() code cleanup * fix a few platformio definitions * more EPD display cleanup * set rotation * use FastEPD arduino I2C by default * touch rotation * update screen for EPD * increase swipe distance for larger screen * EPD UIRenderer * trunk fmt * further #ifdef USE_EPD * disable rotation which messes up w/h; more cleanup * switch off ghosting algo * releease build; V1 buttons * swap V1 buttons * rearrange USE_EINK/EPD macros, use large font * cleanup (revert modified files) * more cleanup * revert * revert file * revert file Removed redundant line continuation in preprocessor directives. * Temporary gate off PSRam calculations until we can fix them * move variant.cpp and update commit references * revert wrong merge * add earlyInitVariant() * initialize all port 0 pins (0-7) as outputs / HIGH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update External Notifications with a full redo of pathways * Correct comments. * Fix TWatch S3 and use HAS_DRV2605
…eration to fix IRAM overflow (#10005) * Exclude web server, paxcounter and few others from original ESP32 generation to fix IRAM overflow * Update variants/esp32/esp32.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/esp32/esp32.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update build source filter in esp32.ini Removed WiFiAPClient.cpp from build source filter. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
We cache and dedupe our dependencies, referring to them with multiple methods/urls is just noise. ``` lewisxhe/XPowersLib@0.3.3 lewisxhe/SensorLib@0.3.4 ``` This does *not* include any updates, just a cleanup.
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
To be consumed by config-picker utils, and hopefully meshtasticd itself in the future.
* Fix TransmitHistory to improve epoch handling * Enable epoch handling in unit tests * Improve comments and test handling for epoch persistence in TransmitHistory * Add boot-relative timestamp handling and unit tests for TransmitHistory * loadFromDisk should handle legacy entries and clean up old v1 files after migration * Revert "loadFromDisk should handle legacy entries and clean up old v1 files after migration" This reverts commit eb7e5c7. * Add NodeInfoModule integration for RTC quality changes and trigger immediate checks * Update test conditions for RTC quality checks
* rotated MUI * mui-maps heltec-v4 adaptations --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
PlatformIO registry is (probably) rate limiting us. Mitigate by switching to GitHub source zips (based upon tags). This change does not include any updates, simply swapping to a new download location.
Dirty hack to keep ESP32c6 building. Remove when updating to pioarduino
Cut down on the spammin! Give the PIO Registry a break!
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Configure NFC pins as GPIO for older bootloaders Should hopefully solve the issue in #9986 * Fix formatting of CONFIG_NFCT_PINS_AS_GPIOS flag in platformio.ini --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
You read that right! Disable PSRAM on the ttgo-tbeam board to reclaim *iram*. ttgo-tbeam.json is a copy of https://github.com/platformio/platform-espressif32/blob/v6.13.0/boards/ttgo-t-beam.json with HAS_PSRAM removed. PSRAM support on OG-ESP32 involves a lot of iram usage thanks to iram-heavy workarounds that have been added to address hardware bugs. See https://docs.espressif.com/projects/esp-idf/en/v4.4/esp32/api-guides/performance/ram-usage.html#optimizing-iram-usage
Renovate is still running after each merge... maybe this will fix it
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Thank you for sending in a pull request, here's some tips to get started!
(Please delete all these tips and replace with your text)
to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.