📡 ESP-HACK FW — Русский

🚀 About ESP-HACK FW

ESP-HACK is a powerful universal firmware for the ESP32, built for RF research and pentesting of radio frequencies, Bluetooth, infrared signals and GPIO integrations. The project targets enthusiasts and pentesters who want to explore protocols and devices in Sub-GHz ranges and other wireless technologies.

For more information, please see our wiki :)

The firmware is stable within its declared functionality, but some features are marked as "in development". Use the device according to the laws in your region.

---

⚠️ Disclaimer

This firmware is designed exclusively for research purposes and hardware testing. By using the firmware, you must comply with the laws of your region. The firmware creator is not responsible for your actions. Jammers are ILLEGAL.

---

⚡ Features

WiFi

• Deauther (nope, lol)
• Beacon Spam
• EvilPortal
• Wardriving
• Packets

Bluetooth

• BLE-Spam: IOS, Android, Windows
• BadBLE
• Mouse

SubGHz

• Read
• Send
• RAW (Record/Send)
• Analyzer
• Bruteforce: Came, Nice, Ansonic, Holtek, Chamberlain
• Jammer (ILLEGAL)

Infrared

• Send
• Read
• TV, PJ, AC OFF

GPIO

iButton

• Read
• Write
• Config

NRF24

• Jammer (ILLEGAL)
• Spectrum
• Config

Serial (in development)

Settings

• Display Color
• Standby time
• About

---

📡 Supported SubGHz modulations

(315MHz/433.92MHz/868Mhz/915Mhz)

• Princeton
• RcSwitch
• Came
• Nice
• Holtec
• Ansonic
• Chamberlain
• StarLine
• KeeLoq
• Any other protocol with RAW mode

---

🛠️ Building

🔧 PCB

Thanks Dripside!

🔧 Required components

Component	Link
ESP32-WROOM	TAP
CC1101	TAP
Display SH1106	TAP
SD Мodule	TAP
Buttons	TAP
IR-TX, IR-RX	TAP

---

🔌 Connection scheme

Module	Pin	Pin	Pin	Pin	Pin	Pin	Pin
📺 Display	VCC → 3V3	GND → GND	SCL → G22	SDA → G21	-	-	-
🔘 Buttons	UP → G27	DOWN → G26	OK → G33	BACK → G32	-	-	-
📡 CC1101	1 → GND	2 → 3V3	3 → G4	4 → G5	5 → G18	6 → G23	7 → G19
💡 IR	IR-TX → G16	IR-RX → G35	-	-	-	-	-
🔌 GPIO	A → G16	B → G2	C → G18	D → G23	E → G19	F → G25	-
💾 SD Card	3v3 → 3v3	CS → G15	MOSI → G13	CLK → G14	MISO → G17	GND → GND	-

---

Errors (ERROR:)

During operation ESP-HACK may show the following errors:

Error code	❌ Problem	🛠️ Possible fix
0x000	SD-Card initialization failed	🛠️ Format the SD card as FAT32 or replace it.
0x001	CC1101 initialization failed	🛠️ Check wiring and module functionality.
0x002	NRF24 initialization failed	🛠️ Verify chosen pins/connections and reboot the device.

---

📸 Final result

---

✉️ Contacts / Author

Author: Teapot174
Telegram: @ESPH4CK