buildkernel

#!/bin/bash
#
# Build kernel, modules and initial ramdisk in correct sequence, ensuring kernel
# config is conformed, then sign if possible and copy to EFI boot partition.
#
# Copyright (c) 2014-2015 sakaki <sakaki@deciban.com>
#
# License (GPL v3.0)
# ------------------
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

set -e
set -u
shopt -s nullglob

# Scroll to the bottom of this script to follow the main program flow.

# ********************** variables ********************* 
PROGNAME="$(basename "${0}")"
CONFFILE="/etc/${PROGNAME}.conf"
VERSION="1.0.13"
ETCPROFILE="/etc/profile"
DEFAULTEFIBOOTFILE="bootx64.efi"
EFIBOOTFILE="${DEFAULTEFIBOOTFILE}"
NEWVERSION="linux-$(cat /usr/src/linux/include/config/kernel.release)"
INITRAMFSNAME="$(echo $NEWVERSION | sed "s/linux/initramfs-genkernel-x86_64/g")"
VMLINUZNAME="$(echo $NEWVERSION | sed "s/linux/vmlinuz/g")"
CURRENTVERSION="linux-$(uname -r)"
LINUXDIR="/usr/src/linux"
CURRENTCONFIG="/proc/config.gz"
TARGETCONFIG="${LINUXDIR}/.config"
BOOTDIR="/boot"
EFIROOTDIR="${BOOTDIR}/efi"
DEFAULTEFIBOOTDIR="/EFI/Boot"
EFIBOOTDIR="${DEFAULTEFIBOOTDIR}"
FULLEFIBOOTDIR="${EFIROOTDIR}${EFIBOOTDIR}"
EFICONFIGFILE="config"
OLDSUFFIX=".old"
PARTUUIDDEVDIR="/dev/disk/by-partuuid"
DISKIDDEVDIR="/dev/disk/by-id"
IDDEVDIR="/dev/disk/by-id"
DEFAULTLUKSKEYFILE="luks-key.gpg"
LUKSKEYFILE="${DEFAULTLUKSKEYFILE}"
MODPROBEDIR="/etc/modprobe.d"
CMDLINE_ROOT="/dev/ram0"
SYSTEMD_INIT="/usr/lib/systemd/systemd"
OPENRC_INIT="/sbin/init"
CMDLINE_REAL_INIT="${SYSTEMD_INIT}"
CMDLINE_DOLVM_FLAG="dolvm"
SECUREBOOTKEY="/etc/efikeys/db.key"
SECUREBOOTCERT="/etc/efikeys/db.crt"
SIGNEDSUFFIX=".signed"
ADDITIONALKERNELCMDS=""
CMDLINE_ROOTFSTYPE="ext4"
CMDLINE_REAL_ROOT="/dev/mapper/vg1-root"
CMDLINE_REAL_RESUME="/dev/mapper/vg1-swap"
# you can use xconfig etc if you like - override in /etc/buildkernel.conf
CONFIGTYPE="menuconfig"
# following should already be in the environment; but to be safe...
export NUMCPUS=$(grep -E 'processor\s+:' /proc/cpuinfo | wc -l)
export NUMCPUSPLUSONE=$(( NUMCPUS + 1 ))
export MAKEOPTS="${MAKEOPTS--j${NUMCPUSPLUSONE} -l${NUMCPUS}}"
export EMERGE_DEFAULT_OPTS="${EMERGE_DEFAULT_OPTS---jobs=${NUMCPUSPLUSONE} --load-average=${NUMCPUS}}"
# below silently updates an old config, auto-choosing defaults for new values
CONFIGUPDATETYPE="olddefconfig"
SILENTUPDATETYPE="olddefconfig"
RED_TEXT="" GREEN_TEXT="" YELLOW_TEXT="" RESET_ATTS=""  ALERT_TEXT=""
if [[ -v TERM && -n "${TERM}" && "${TERM}" != "dumb" ]]; then
    RED_TEXT="$(tput setaf 1)$(tput bold)"
    GREEN_TEXT="$(tput setaf 2)$(tput bold)"
    YELLOW_TEXT="$(tput setaf 3)$(tput bold)"
    RESET_ATTS="$(tput sgr0)"
    ALERT_TEXT="$(tput bel)"
fi
# used in subshells
UNCOMPRESSEDINITRAMFS="${BOOTDIR}/initramfs.cpio"
INITRAMFSDIR="${BOOTDIR}/initramfs"
VERBOSITY=1
PREFIXSTRING="* "
SHOWPREFIX="${GREEN_TEXT}${PREFIXSTRING}${RESET_ATTS}"
SHOWSUFFIX=""
GPG1PATHFROM="/usr/bin/staticgpg"
GPG1PATHTO="${INITRAMFSDIR}/usr/bin/gpg"
GPGBUILDDIR="/root/tmpgpgbuild"
TMPGPGPATH="${GPGBUILDDIR}/usr/bin/gpg"
declare -i USINGUSBKEYFOREFI=0
declare -i BACKUPOLDKERNEL=1
EFIPARTNAME="EFI boot partition"
DEFAULTKEYMAP="us"
KEYMAP="${DEFAULTKEYMAP}"
# leave blank if you don't want to use the plymouth graphical boot
# manager, otherwise override to a theme of your choice, such as "text" or
# "solar"
DEFAULTPLYMOUTHTHEME=""
PLYMOUTHTHEME="${DEFAULTPLYMOUTHTHEME}"
# default init system supported by this script is systemd, but we now
# also support OpenRC
DEFAULTINITSYSTEM="systemd"
INITSYSTEM="${DEFAULTINITSYSTEM}"
# following variable is conformed on installation by ebuild
# (to reflect setting of "plymouth" USE flag)
USE_PLYMOUTH=true
VERBOSITYFLAG=""
ASKFLAG=""
ALERTFLAG=""
PORTAGEINFO=""
# following array variables set by find_all_gpg_keyfile_partitions function
declare -a GPGUUIDS GPGPARTNAMES GPGDEVNAMES GPGPARTNUMS
# following array variables set by find_all_luks_partitions function
declare -a LUKSUUIDS LUKSPARTNAMES LUKSDEVNAMES LUKSPARTNUMS
declare -a LUKSONUSBS
# following array variables set by find_all_efi_system_partitions function
declare -a EFIUUIDS EFIPARTNAMES EFIDEVNAMES EFIPARTNUMS
declare -a EFIONUSBS
# following array variables set by find_all_efi_boot_entries
# (held in boot index order, NOT boot order)
declare -a EBOOTIDS EBOOTNAMES EBOOTPATHS EBOOTUUIDS
declare -a EBOOTISACTIVES EBOOTORDER
declare -i EFIBOOTENTRIESSEARCHED=0
# stores whether boot entry is for Windows or not, keyed by partition UUID
declare -A HASWINBOOTLOADER
# map between BOOT ID (a 4 digit hex string) and index in EBOOT... arrays
declare -A EBOOTIDTOINDEX
# used to unwind mountpoints on failure
declare -A ALLMOUNTS
# has a '1' entry for all USB partitions; set by find_all_usb_partitions
declare -A ISUSBPART
# used by menu-driven config setting
declare -i CONFIGDIRTY=0
# set if CRYPTPATHMAP declared in config file
declare -i CRYPTPATHMAPFORCED=0
# archived prior versions of key config variables
PROCVARS=("EFIPARTUUID" "CRYPTPARTUUID" "KEYFILEPARTUUID" "LUKSKEYFILE" \
    "EFIBOOTDIR" "EFIBOOTFILE" "PLYMOUTHTHEME" "KEYMAP" "INITSYSTEM")
NEXTVAR=""
for NEXTVAR in "${PROCVARS[@]}"; do
    declare "OLD_${NEXTVAR}"=""
done

# running under EFI?
declare -i USINGEFI=0

declare -i MOUNTEDONENTRY=0
# program arguments (booleans in this case)
declare -i ARG_ASK=0 ARG_CLEAN=0 ARG_COPYFROMSTAGING=0 ARG_HELP=0
declare -i ARG_STAGEONLY=0 ARG_UNMOUNTATEND=0 ARG_VERBOSE=0 ARG_VERSION=0
declare -i ARG_POSTCLEAR=0 ARG_MENUCONFIG=0 ARG_SNAPSHOTBACKUP=0
declare -i ARG_EASYSETUP=0 ARG_IS_NEW_KERNEL_AVAILABLE=0
declare -i ARG_REBUILD_EXTERNAL_MODULES=0 ARG_ALERT=0

# ***************** various functions ****************** 
cleanup_and_exit_with_code() {
    # add any additional cleanup code here
    set +e
    trap - EXIT
    umount_all_remembered_mountpoints
    exit $1
}
fn_exists() {
    declare -f -F "${1}" > /dev/null
    return $?
}
show() {
    local MESSAGE=${1:-""}
    local VERBLEVEL=${2:-${VERBOSITY}}
    if (( VERBLEVEL >=1 )); then
        echo -e "${SHOWPREFIX}${MESSAGE}${SHOWSUFFIX}"
    fi
}
alertshow() {
    local MESSAGE=${1:-""}
    local VERBLEVEL=${2:-${VERBOSITY}}
    if ((ARG_ALERT==0)); then
        show "${@}"
    elif (( VERBLEVEL >=1 )); then
        echo -e "${SHOWPREFIX}${MESSAGE}${SHOWSUFFIX}${ALERT_TEXT}"
    fi
}
warning() {
    echo -e "${YELLOW_TEXT}${PREFIXSTRING}${RESET_ATTS}${PROGNAME}: Warning: ${1}" >&2
}
die() {
    echo
    echo -e "${RED_TEXT}${PREFIXSTRING}${RESET_ATTS}${PROGNAME}: Error: ${1} - exiting" >&2
    cleanup_and_exit_with_code 1
}
trap_cleanup() {
    trap - SIGHUP SIGQUIT SIGINT SIGTERM SIGKILL EXIT
    die "Caught signal"
}
trap trap_cleanup SIGHUP SIGQUIT SIGINT SIGTERM SIGKILL EXIT
test_yn() {
    echo -n -e "${SHOWPREFIX}${1} (y/n)? ${SHOWSUFFIX}${ALERT_TEXT}"
    read -r -n 1
    echo
    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
        return 0
    else
        return 1
    fi
}
test_yn_need_enter() {
    echo -n -e "${SHOWPREFIX}${1} (y/n)? ${SHOWSUFFIX}${ALERT_TEXT}"
    read -r
    echo
    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
        return 0
    else
        return 1
    fi
}
continue_yn() {
    if ! test_yn "${1}"; then
        echo -e "${RED_TEXT}${PREFIXSTRING}${RESET_ATTS}Quitting" >&2
        cleanup_and_exit_with_code 1
    fi
}
suppress_colours() {
    RED_TEXT=""
    GREEN_TEXT=""
    YELLOW_TEXT=""
    RESET_ATTS=""
    SHOWPREFIX="${PREFIXSTRING}"
}
suppress_alert() {
    ALERT_TEXT=""
}
suppress_colour_and_alert_if_output_not_to_a_terminal() {
    if [ ! -t 1 -o ! -t 2 ]; then
        # we are going to a non-terminal
        suppress_colours
        suppress_alert
    fi
}
check_file_exists() {
    if [ ! -f "${1}" ]; then
        die "File '${1}' does not exist"
    fi
}
read_portage_info_if_necessary() {
    if [ -z "${PORTAGEINFO}" ]; then
        show "Checking Portage configuration, please wait..."
        PORTAGEINFO="$(emerge --info)"
    fi
}
check_gcc_config_and_reset_if_necessary() {
    # check if gcc-config exists with an error - if it does, then
    # attempt to set one based on the current gcc version number
    if ! gcc-config --get-current-profile >/dev/null 2>&1; then
        # unset or invalid, attempt to force this to the current gcc
        # version
        read_portage_info_if_necessary
        local CHOST="$(grep '^CHOST=.*' <<<"${PORTAGEINFO}")"
        CHOST="$(cut -d\" -f2 <<< ${CHOST})"
        local GCC_VERSION=""
        # can't be sure we have eix installed
        if eix --version >/dev/null 2>&1; then
            # we do, so can cleanly check latest installed gcc version
            GCC_VERSION="$(eix --installed --exact sys-devel/gcc --format '<installedversions:NAMEVERSION>' --versionsort | tail -n 1)"
            GCC_VERSION="${GCC_VERSION##*gcc-}"
        else
            # we don't, have to hack the most recent gcc version
            GCC_VERSION="$(ls -1v "/usr/${CHOST}/gcc-bin" | tail -n 1)"
        fi
        local FULL_GCC_ID="${CHOST}-${GCC_VERSION}"
        if gcc-config "${FULL_GCC_ID}"; then
            warning "gcc configuration was reset"
            if [ -s "${ETCPROFILE}" ]; then
                set +e
                set +u
                shopt -u nullglob
                source "${ETCPROFILE}"
                shopt -s nullglob
                set -e
                set -u
            fi
        else
            die "failed to set gcc configuration"
        fi
    fi
}
mount_and_remember() {
    local DEVPATH="${1}"
    local MOUNTPOINT="${2}"
    local TYPE=${3:-""}
    
    if [[ "${ALLMOUNTS[${MOUNTPOINT}]+_}" ]]; then
        warning "Attempt to mount '${MOUNTPOINT}' more than once"
    else
        if [ -n "${TYPE}" ]; then
            mount -t "${TYPE}" "${DEVPATH}" "${MOUNTPOINT}"
        else
            mount "${DEVPATH}" "${MOUNTPOINT}"
        fi
        # and remember we mounted it
        ALLMOUNTS["${MOUNTPOINT}"]="${DEVPATH}"
    fi
}
umount_and_forget() {
    local MOUNTPOINT="${1}"
    if [[ "${ALLMOUNTS[${MOUNTPOINT}]+_}" ]]; then
        umount --lazy "${MOUNTPOINT}"
        # and forget
        unset -v "ALLMOUNTS[${MOUNTPOINT}]"
    else
        warning "Attempt to unmount '${MOUNTPOINT}', but not mounted"
    fi
}
umount_all_remembered_mountpoints() {
    local M ALLREMEMBEREDMOUNTS="${!ALLMOUNTS[@]}"
    for M in ${ALLREMEMBEREDMOUNTS}; do
        warning "Unmounting '${M}'"
        umount_and_forget "${M}"
    done
}
check_is_luks_volume() {
    cryptsetup isLuks "${1}" || die "Path '${1}' is not a LUKS volume"
}
partuuid_is_on_usb_device() {
    local CANONPART="$(readlink --canonicalize "${PARTUUIDDEVDIR}/${1,,}")"
    if [[ "${ISUSBPART[${CANONPART}]-0}" == "1" ]]; then
        return 0
    fi
    return 1
}
check_partuuid_exists() {
    if [ ! -h "${PARTUUIDDEVDIR}/${1}" ]; then
        die "Partition with UUID '${1}' does not exist"
    fi
}
source_etc_conf_file() {
    # get the variables the user must set, and any overrides
    if [ ! -s "${CONFFILE}" ]; then
        warning "${CONFFILE} does not exist"
        if test_yn "Would you like to run --easy-setup now to fix this"; then
            interactively_set_buildkernel_config
            cleanup_and_exit_with_code 0
        else
            die "Cannot proceed; please create ${CONFFILE} manually"
        fi
    fi
    source "${CONFFILE}"
    # make sure the PARTUUIDs are lower case, if defined
    if [[ -v EFIPARTUUID ]]; then
        EFIPARTUUID="${EFIPARTUUID,,}"
    fi
    if [[ -v CRYPTPARTUUID ]]; then
        CRYPTPARTUUID="${CRYPTPARTUUID,,}"
    fi
    if [[ -v KEYFILEPARTUUID ]]; then
        KEYFILEPARTUUID="${KEYFILEPARTUUID,,}"
    fi
    # remember if CRYPTPATHMAP set
    if [[ -v CRYPTPATHMAP ]]; then
        CRYPTPATHMAPFORCED=1
    fi
    # map INITSYSTEM to lower case
    if [[ -v INITSYSTEM ]]; then
        INITSYSTEM="${INITSYSTEM,,}"
    fi
}
setup_final_variables() {
    # post-processing once buildkernel.conf loaded
    # critical that EFIPARTUUID and CRYPTPARTUUID are defined...
    # (NB - buildkernel now also supports a LUKS filesystem that does not live
    # in a GPT partition - you can simply override CRYPTPATHMAP directly in
    # buildkernel.conf. If you set this, then CRYPTPARTUUID will not be checked
    # and its contents (if any) will be ignored.)
    if [ -z ${EFIPARTUUID+xxx} ]; then
        warning "EFIPARTUUID not set in ${CONFFILE}"
        if test_yn "Would you like to run --easy-setup now to fix this"; then
            interactively_set_buildkernel_config
            cleanup_and_exit_with_code 0
        else
            die "Cannot proceed; please edit ${CONFFILE} manually"
        fi
    fi
    if ((CRYPTPATHMAPFORCED==1)); then
        if [ -z "${CRYPTPATHMAP}" ]; then
            die "CRYPTPATHMAP set to empty string in ${CONFFILE}; cannot proceed"
        fi
        warning "CRYPTPATHMAP defined in ${CONFFILE}"
        warning "CRYPTPARTUUID will be ignored"
        # check it
        if ! cryptsetup isLuks "${CRYPTPATHMAP}"; then
            die "CRYPTPATHMAP ('${CRYPTPATHMAP}') does not specify a LUKS filesystem"
        fi
    elif [ -z ${CRYPTPARTUUID+xxx} ]; then
        warning "CRYPTPARTUUID not set in ${CONFFILE}"
        if test_yn "Would you like to run --easy-setup now to fix this"; then
            interactively_set_buildkernel_config
            cleanup_and_exit_with_code 0
        else
            die "Cannot proceed; please edit ${CONFFILE} manually"
        fi
    fi
    if [ -n "${PLYMOUTHTHEME}" ] && ! "${USE_PLYMOUTH}"; then
        warning "You have specified a PLYMOUTHTHEME, but ${PROGNAME} was emerged"
        warning "without the plymouth use flag set - ignoring."
        PLYMOUTHTHEME=""
    fi
    EFIPATHMAP="${PARTUUIDDEVDIR}/${EFIPARTUUID}"
    if ((CRYPTPATHMAPFORCED==0)); then
        CRYPTPATHMAP="${PARTUUIDDEVDIR}/${CRYPTPARTUUID}"
    fi # otherwise, leave it as set
    # check if the user has specified an OpenRC init; if not, assume systemd
    if [[ "${INITSYSTEM}" == "openrc" ]]; then
        # need a different path for the init executable
        CMDLINE_REAL_INIT="${OPENRC_INIT}"
    elif [[ "${INITSYSTEM}" != "systemd" ]]; then
        warning "Unrecognized INITSYSTEM, assuming systemd"
        INITSYSTEM="systemd"
    fi
    # assume keyfile is also on the EFI system partition, unless KEYFILEPARTUUID
    # has been set explicitly in buildkernel.conf
    KEYFILEPARTUUID="${KEYFILEPARTUUID:-${EFIPARTUUID}}"
    KEYFILEPATHMAP="${PARTUUIDDEVDIR}/${KEYFILEPARTUUID}"
    # we use path syntax rather than "=PARTUUID=" syntax, as more reliable
    KERNEL_CMD_LINE="root=${CMDLINE_ROOT} crypt_root=${CRYPTPATHMAP} dolvm "
    KERNEL_CMD_LINE+="real_root=${CMDLINE_REAL_ROOT} rootfstype=${CMDLINE_ROOTFSTYPE} "
    KERNEL_CMD_LINE+="real_init=${CMDLINE_REAL_INIT} "
    if [ -n "${LUKSKEYFILE}" ]; then
        KERNEL_CMD_LINE+="root_keydev=${KEYFILEPATHMAP} root_key=${LUKSKEYFILE} "
    fi
    KERNEL_CMD_LINE+="real_resume=${CMDLINE_REAL_RESUME} "
    KERNEL_CMD_LINE+="keymap=${KEYMAP}"
    if [ -n "${PLYMOUTHTHEME}" ]; then
        KERNEL_CMD_LINE+=" quiet splash"
    fi
    if [ -n "${ADDITIONALKERNELCMDS}" ]; then
        KERNEL_CMD_LINE+=" ${ADDITIONALKERNELCMDS}"
    fi
}
check_if_booted_under_efi() {
    if [ -d "/sys/firmware/efi" ]; then
        USINGEFI=1
    else
        USINGEFI=0
    fi
}
find_all_usb_partitions() {
    # overwrites ISUSBPART
    local U ALLU="${!ISUSBPART[@]}"
    for U in ${ALLU}; do
        unset -v "ISUSBPART[${U}]"
    done
    local NEXTID
    for NEXTID in "${DISKIDDEVDIR}/usb-"*"-part"*[[:digit:]]; do
        if [ -e "${NEXTID}" ]; then
            # remember this
            local NEXTCANONPART="$(readlink --canonicalize "${NEXTID}")"
            ISUSBPART["${NEXTCANONPART}"]="1"
        fi
    done
}
find_all_gpg_keyfile_partitions() {
    # overwrites the variables GPGUUIDS, GPGPARTNAMES, GPGDEVNAMES and
    # GPGPARTNUMS
    # we only look for non-LUKS partitions on attached USB devices
    # we don't mount to check that the file is there
    GPGUUIDS=(); GPGPARTNAMES=(); GPGDEVNAMES=(); GPGPARTNUMS=()
    local NEXTPART
    for NEXTPART in "${PARTUUIDDEVDIR}"/*; do
        if [ -e "${NEXTPART}" ]; then
            if ! cryptsetup isLuks "${NEXTPART}"; then
                NEXTPART="${NEXTPART,,}"
                local NEXTUUID="${NEXTPART##*/}"
                local NEXTPARTNAME="$(readlink --canonicalize "${NEXTPART}")" # e.g. /dev/sda3
                local NEXTDEVNAME="${NEXTPARTNAME%%[[:digit:]]*}"              # e.g. /dev/sda
                local NEXTPARTNUM="${NEXTPARTNAME##*[^[:digit:]]}"              # e.g. 3
                if partuuid_is_on_usb_device "${NEXTUUID}"; then
                    # assign results (Bash treats arrays as unset if not assigned a value)
                    GPGUUIDS=("${GPGUUIDS[@]:+${GPGUUIDS[@]}}" "${NEXTUUID}")
                    GPGPARTNAMES=("${GPGPARTNAMES[@]:+${GPGPARTNAMES[@]}}" "${NEXTPARTNAME}")
                    GPGDEVNAMES=("${GPGDEVNAMES[@]:+${GPGDEVNAMES[@]}}" "${NEXTDEVNAME}")
                    GPGPARTNUMS=("${GPGPARTNUMS[@]:+${GPGPARTNUMS[@]}}" "${NEXTPARTNUM}")
                fi
            fi
        fi
    done
}
find_all_luks_partitions() {
    # overwrites the variables LUKSUUIDS, LUKSPARTNAMES, LUKSDEVNAMES, 
    # LUKSPARTNUMS and LUKSONUSBS
    LUKSUUIDS=(); LUKSPARTNAMES=(); LUKSPARTNAMES=(); LUKSDEVNAMES=()
    LUKSPARTNUMS=(); LUKSONUSBS=()
    local NEXTPART
    for NEXTPART in "${PARTUUIDDEVDIR}"/*; do
        if [ -e "${NEXTPART}" ]; then
            if cryptsetup isLuks "${NEXTPART}"; then
                NEXTPART="${NEXTPART,,}"
                local NEXTUUID="${NEXTPART##*/}"
                local NEXTPARTNAME="$(readlink --canonicalize "${NEXTPART}")" # e.g. /dev/sda3
                local NEXTDEVNAME="${NEXTPARTNAME%%[[:digit:]]*}"              # e.g. /dev/sda
                local NEXTPARTNUM="${NEXTPARTNAME##*[^[:digit:]]}"              # e.g. 3
                local NEXTONUSB="0"
                if partuuid_is_on_usb_device "${NEXTUUID}"; then
                    NEXTONUSB="1"
                fi
                # assign results (Bash treats arrays as unset if not assigned a value)
                LUKSUUIDS=("${LUKSUUIDS[@]:+${LUKSUUIDS[@]}}" "${NEXTUUID}")
                LUKSPARTNAMES=("${LUKSPARTNAMES[@]:+${LUKSPARTNAMES[@]}}" "${NEXTPARTNAME}")
                LUKSDEVNAMES=("${LUKSDEVNAMES[@]:+${LUKSDEVNAMES[@]}}" "${NEXTDEVNAME}")
                LUKSPARTNUMS=("${LUKSPARTNUMS[@]:+${LUKSPARTNUMS[@]}}" "${NEXTPARTNUM}")
                LUKSONUSBS=("${LUKSONUSBS[@]:+${LUKSONUSBS[@]}}" "${NEXTONUSB}")
            fi
        fi
    done

}
find_all_efi_system_partitions() {
    # overwrites the variables EFIUUIDS, EFIPARTNAMES, EFIDEVNAMES, 
    # EFIPARTNUMS and EFIONUSBS
    EFIUUIDS=(); EFIPARTNAMES=(); EFIPARTNAMES=(); EFIDEVNAMES=()
    EFIPARTNUMS=(); EFIONUSBS=()
    local NEXTPART
    for NEXTPART in "${PARTUUIDDEVDIR}"/*; do
        if [ -e "${NEXTPART}" ]; then
            NEXTPART="${NEXTPART,,}"
            local NEXTUUID="${NEXTPART##*/}"
            local NEXTPARTNAME="$(readlink --canonicalize "${NEXTPART}")" # e.g. /dev/sda3
            local NEXTDEVNAME="${NEXTPARTNAME%%[[:digit:]]*}"              # e.g. /dev/sda
            local NEXTPARTNUM="${NEXTPARTNAME##*[^[:digit:]]}"              # e.g. 3
            local NEXTONUSB="0"
            if partuuid_is_on_usb_device "${NEXTUUID}"; then
                NEXTONUSB="1"
            fi
            if grep -qi 'EFI System' <(sgdisk --info "${NEXTPARTNUM}" "${NEXTDEVNAME}"); then
                # assign results (Bash treats arrays as unset if not assigned a value)
                EFIUUIDS=("${EFIUUIDS[@]:+${EFIUUIDS[@]}}" "${NEXTUUID}")
                EFIPARTNAMES=("${EFIPARTNAMES[@]:+${EFIPARTNAMES[@]}}" "${NEXTPARTNAME}")
                EFIDEVNAMES=("${EFIDEVNAMES[@]:+${EFIDEVNAMES[@]}}" "${NEXTDEVNAME}")
                EFIPARTNUMS=("${EFIPARTNUMS[@]:+${EFIPARTNUMS[@]}}" "${NEXTPARTNUM}")
                EFIONUSBS=("${EFIONUSBS[@]:+${EFIONUSBS[@]}}" "${NEXTONUSB}")
            fi
        fi
    done
}
find_all_efi_boot_entries() {
    # overwrites the variables EBOOTIDS EBOOTNAMES EBOOTPATHS EBOOTUUIDS
    # and EBOOTISACTIVES, EBOOTORDER
    # and also HASWINBOOTLOADER and EBOOTIDTOINDEX
    EBOOTIDS=(); EBOOTNAMES=(); EBOOTPATHS=(); EBOOTUUIDS=()
    EBOOTISACTIVES=(); EBOOTORDER=()
    local K ALLK="${!HASWINBOOTLOADER[@]}"
    for K in ${ALLK}; do
        unset -v "HASWINBOOTLOADER[${K}]"
    done
    ALLK="${!EBOOTIDTOINDEX[@]}"
    for K in ${ALLK}; do
        unset -v "EBOOTIDTOINDEX[${K}]"
    done
    if ((USINGEFI==0)); then
        warning "This system wasn't booted under UEFI, cannot check boot entries"
        return 0
    fi
    local NEXTLINE
    declare -i NEXTINDEX=0
    # only look for hard drive entries here
    while read -r NEXTLINE; do
        local NEXTID="${NEXTLINE:4:4}"
        local NEXTSIG="${NEXTLINE:0:8}"
        local NEXTISACTIVE="${NEXTLINE:8:1}"
        if [[ "${NEXTISACTIVE}" == "*" ]]; then
            NEXTISACTIVE="1"
        else
            NEXTISACTIVE="0"
        fi
        local NEXTUUID=$(egrep -o 'HD\([^(]*\)' <<<"${NEXTLINE}" | egrep -o '[[:xdigit:]]{8}(\-[[:xdigit:]]{4}){3}\-[[:xdigit:]]{12}')
        local NEXTPATH=$(egrep -o 'File\([^(]*\)' <<<"${NEXTLINE}")
        NEXTPATH="${NEXTPATH:5:-1}"
        local NEXTNAME="$(efibootmgr | grep "^${NEXTSIG}" | cut -c11-)"
        NEXTUUID="${NEXTUUID,,}"
        if [[ -z "${NEXTID}" || -z "${NEXTNAME}" || -z "${NEXTPATH}" || -z "${NEXTUUID}" || -z "${NEXTISACTIVE}" ]]; then
            # one of the required strings is empty, we cannot use this line
            continue
        fi
        # assign results (Bash treats arrays as unset if not assigned a value)
        EBOOTIDS=("${EBOOTIDS[@]:+${EBOOTIDS[@]}}" "${NEXTID}")
        EBOOTNAMES=("${EBOOTNAMES[@]:+${EBOOTNAMES[@]}}" "${NEXTNAME}")
        EBOOTPATHS=("${EBOOTPATHS[@]:+${EBOOTPATHS[@]}}" "${NEXTPATH}")
        EBOOTUUIDS=("${EBOOTUUIDS[@]:+${EBOOTUUIDS[@]}}" "${NEXTUUID}")
        EBOOTISACTIVES=("${EBOOTISACTIVES[@]:+${EBOOTISACTIVES[@]}}" "${NEXTISACTIVE}")
        # archive whether or not this is a windows bootloader entry
        # there can be >1 entry for the same UUID, so this acts like a
        # 'dirty' flag
        if grep -i -q "Windows" <<<"${NEXTNAME}"; then
            HASWINBOOTLOADER["${NEXTUUID}"]="1"
        fi
        # store a lookup from boot ID (4 digit hex string) to index in these
        # arrays
        EBOOTIDTOINDEX["${NEXTID}"]="${NEXTINDEX}"
        NEXTINDEX=$((NEXTINDEX+1))
    done < <(efibootmgr -v | grep '^Boot0[^ ]*.*HD([^\)]*)')
    # now extract the boot order, and save it into EBOOTORDER in ascending order
    EBOOTORDER=($(efibootmgr | grep '^BootOrder' | sed 's/BootOrder: //g;s/,/ /g'))
    EFIBOOTENTRIESSEARCHED=1
}
archive_current_config_variables() {
    local NEXTVAR
    for NEXTVAR in "${PROCVARS[@]}"; do
        if [[ -v "${NEXTVAR}" ]] ; then
            eval "OLD_${NEXTVAR}"="${!NEXTVAR}"
        else
            unset -v "OLD_${NEXTVAR}"
        fi
    done
}
warn_if_buildkernel_config_incomplete() {
    declare -i WILLRUN=1
    if [[ ! -v EFIPARTUUID ]]; then
        warning "EFIPARTUUID not set in ${CONFFILE}"
        WILLRUN=0
    fi
    if ((CRYPTPATHMAPFORCED==1)); then
        if [ -z "${CRYPTPATHMAP}" ]; then
            warning "CRYPTPATHMAP set to empty string in ${CONFFILE}"
            WILLRUN=0
        fi
        warning "CRYPTPATHMAP defined in ${CONFFILE}"
        warning "CRYPTPARTUUID will be ignored"
    elif [[ ! -v CRYPTPARTUUID ]]; then
        warning "CRYPTPARTUUID not set in ${CONFFILE}"
        WILLRUN=0
    fi
    if ((WILLRUN==0)); then
        warning "${PROGNAME} cannot create a kernel until you fix this"
    fi
}
interactively_set_buildkernel_config() {
    find_all_gpg_keyfile_partitions
    find_all_luks_partitions
    find_all_efi_system_partitions
    find_all_efi_boot_entries
    archive_current_config_variables
    declare -i DOSAVE=0 DOEXIT=0
    declare -a TOPMENU=("Set EFI system partition" "Set LUKS root partition" \
        "Set LUKS key options" "Set EFI boot file path"\
        "Set boot splash options" "Set boot-time keymap" \
        "Set init system" \
        "Exit without saving" "Save and exit")
    local X
    PS3="Your choice: "
    until ((DOEXIT==1)); do
        show_current_key_config_status
        show "Please choose an option:"
        select X in "${TOPMENU[@]}"; do
            printf "\n"
            case "${X}" in
                "Set EFI system partition") set_efi_system_partition; break ;;
                "Set LUKS root partition") set_luks_root_partition; break ;;
                "Set LUKS key options") set_luks_key_options; break ;;
                "Set EFI boot file path") set_efi_boot_file_path; break ;;
                "Set boot splash options") set_boot_splash_options; break ;;
                "Set boot-time keymap") set_boot_time_keymap; break ;;
                "Set init system") set_init_system; break ;;
                "Exit without saving") DOEXIT=1; break ;;
                "Save and exit") DOSAVE=1; DOEXIT=1; break ;;
                *) warning "Please choose one of the menu options!"; break ;;
            esac
        done
        if ((DOEXIT==1 && DOSAVE==0 && CONFIGDIRTY==1)); then
            if ! test_yn_need_enter "Are you sure? Your changes will be lost. Proceed"; then
                DOEXIT=0
            fi 
        fi
    done
    if ((DOSAVE==0)); then
        if ((CONFIGDIRTY==1)); then
            warning "As instructed, your changes were not saved!"
        else
            show "Configuration unchanged."
        fi
    else
        # user wants to save
        if ((CONFIGDIRTY==1)); then
            save_buildkernel_config
            show "Configuration saved to ${CONFFILE}."
            show "Be sure to run ${PROGNAME}, to rebuild the kernel with the new"
            show "settings, before rebooting."
        else
            show "Configuration is unchanged, nothing to save."
        fi
        warn_if_efi_boot_file_clashes_with_windows_bootloader
        warn_if_buildkernel_config_incomplete
    fi
}
save_buildkernel_config() {
    local NEXTVAR NEXTDEFAULTVAR
    # ensure any existing definitions are commented out
    for NEXTVAR in "${PROCVARS[@]}"; do
        sed -i "/^${NEXTVAR}=/s/^/# /" "${CONFFILE}"
    done
    # get rid of the existing 'auto' section, if there is one
    sed -i '/^# Automatically added by '"${PROGNAME}"' - edits here may be overwritten/,/^# End of automatically added section/d' "${CONFFILE}"
    # now append remaining vars to end
    printf "# Automatically added by ${PROGNAME} - edits here may be overwritten\n" >> "${CONFFILE}"
    for NEXTVAR in "${PROCVARS[@]}"; do
        if [[ -v "${NEXTVAR}" ]] ; then
            # don't write out anything if we have the default value set anyway
            NEXTDEFAULTVAR="DEFAULT${NEXTVAR}"
            if [[ -v "${NEXTDEFAULTVAR}" && "${!NEXTVAR}" == "${!NEXTDEFAULTVAR}" ]] ; then
                continue
            fi
            printf "${NEXTVAR}=\"${!NEXTVAR}\"\n" >> "${CONFFILE}"
        fi
    done
    printf "# End of automatically added section\n" >> "${CONFFILE}"
    # copy the keyfile, if location or path has changed
    if [[ -v OLD_LUKSKEYFILE && -v LUKSKEYFILE  && \
        ( -v OLD_EFIPARTUUID || -v OLD_KEYFILEPARTUUID ) ]]; then
        local OLD_ACTUAL_KEYFILEPARTUUID="${OLD_KEYFILEPARTUUID:-${OLD_EFIPARTUUID}}"
        local ACTUAL_KEYFILEPARTUUID="${KEYFILEPARTUUID:-${EFIPARTUUID}}"
        if [[ -n "${LUKSKEYFILE}" && -n "${OLD_LUKSKEYFILE}" && \
            ( "${ACTUAL_KEYFILEPARTUUID}" != "${OLD_ACTUAL_KEYFILEPARTUUID}" || \
              "${LUKSKEYFILE}" != "${OLD_LUKSKEYFILE}" ) ]]; then
            show "Your LUKS keyfile location has changed:"
            show "Old PARTUUID: ${OLD_ACTUAL_KEYFILEPARTUUID}, filename: '${OLD_LUKSKEYFILE}'"
            show "New PARTUUID: ${ACTUAL_KEYFILEPARTUUID}, filename: '${LUKSKEYFILE}'"
            if test_yn_need_enter "Would you like to copy the keyfile across now"; then
                copy_file_from_partition_to_partition \
                    "${OLD_ACTUAL_KEYFILEPARTUUID}" "/${OLD_LUKSKEYFILE}" \
                    "${ACTUAL_KEYFILEPARTUUID}" "/${LUKSKEYFILE}" \
                    "keyfile copied successfully (original retained)" \
                    "Error copying keyfile - please copy manually"
            else
                warning "File not copied"
                warning "Please ensure '${LUKSKEYFILE}' available on"
                warning "partition ${ACTUAL_KEYFILEPARTUUID}"
                warning "before attempting to reboot"
            fi
        fi
    fi
    # it may be dangerous to leave /boot/efi mounted, if the user has
    # changed its location, so unmount it now if necessary
    if mount | grep -q " ${EFIROOTDIR} " > /dev/null; then
        show "Unmounting ${EFIROOTDIR} for safety"
        umount_and_forget "${EFIROOTDIR}"
    fi
}
set_efi_system_partition() {
    declare -i DOEXIT=0 NUMEFIPARTS="${#EFIUUIDS[@]}"
    local NUMREG='^[0-9]+$'
    until ((DOEXIT==1)); do
        show "Please choose which EFI system partition to use (or GO BACK):"
        show_efi_system_partitions "GO BACK"
        printf "%s" "${PS3}"
        local N
        read -r N
        if [[ "${N}" =~ ${NUMREG} ]]; then
            if ((N>=1 && N<=NUMEFIPARTS)); then
                # valid partition, set it
                if [[ -v EFIPARTUUID ]]; then
                    if [[ "${EFIPARTUUID}" != "${EFIUUIDS[$((N-1))]}" ]]; then
                        CONFIGDIRTY=1;
                    fi
                else
                    CONFIGDIRTY=1;
                fi
                EFIPARTUUID="${EFIUUIDS[$((N-1))]}"
                DOEXIT=1;
                show "EFI system partition selected as follows:"
                show_efi_system_partitions
                warn_if_efi_boot_file_clashes_with_windows_bootloader
                make_key_file_location_expicit_if_necessary_and_wanted
            elif ((N==1+NUMEFIPARTS)); then
                DOEXIT=1;
            fi
        fi
        if ((DOEXIT==0)); then
            warning "Please choose one of the menu options!"
        fi
    done
}
set_luks_root_partition() {
    declare -i DOEXIT=0 NUMLUKSPARTS="${#LUKSUUIDS[@]}"
    local NUMREG='^[0-9]+$'
    until ((DOEXIT==1)); do
        show "Please choose which LUKS partition contains the root LVM logical volume:"
        show_luks_partitions "GO BACK"
        printf "%s" "${PS3}"
        local N
        read -r N
        if [[ "${N}" =~ ${NUMREG} ]]; then
            if ((N>=1 && N<=NUMLUKSPARTS)); then
                # valid partition, set it
                if [[ -v CRYPTPARTUUID ]]; then
                    if [[ "${CRYPTPARTUUID}" != "${LUKSUUIDS[$((N-1))]}" ]]; then
                        CONFIGDIRTY=1;
                    fi
                else
                    CONFIGDIRTY=1;
                fi
                CRYPTPARTUUID="${LUKSUUIDS[$((N-1))]}"
                DOEXIT=1;
                show "LUKS partition selected as follows:"
                show_luks_partitions
            elif ((N==1+NUMLUKSPARTS)); then
                DOEXIT=1;
            fi
        fi
        if ((DOEXIT==0)); then
            warning "Please choose one of the menu options!"
        fi
    done
}
show_current_key_config_status() {
    # main things we need are: EFIPARTUUID, CRYPTPARTUUID, KEYFILEPARTUUID
    # LUKSKEYFILE, EFIBOOTDIR, EFIBOOTFILE, PLYMOUTHTHEME, KEYMAP and INITSYSTEM
    local MODFLAG=""
    if ((CONFIGDIRTY==1)); then
        MODFLAG=" - MODIFIED"
    fi
    printf "\n"
    show "Current configuration (from ${CONFFILE}${MODFLAG}):"
    printf "\n"
    printf "  EFI system partition UUID:  %-36s\n" "${EFIPARTUUID:-NEEDS SETTING}"
    if ((CRYPTPATHMAPFORCED==0)); then
        printf "  LUKS root partition UUID:   %-36s\n" "${CRYPTPARTUUID:-NEEDS SETTING}"
    else
        printf "  LUKS root partition UUID:   %-36s\n" "IGNORED, OVERRIDDEN BY CRYPTPATHMAP"
        printf "    (to '%s')\n" "${CRYPTPATHMAP}"
    fi
    printf "  GPG keyfile partition UUID: %-36s\n" "${KEYFILEPARTUUID:-DEFAULT (=EFI system partition UUID)}"
    printf "  GPG keyfile (for LUKS):     %-36s\n" "${LUKSKEYFILE:-NONE (using fallback passphrase)}"
    printf "  EFI boot directory:         %-36s\n" "${EFIBOOTDIR:-NEEDS SETTING}"
    printf "  EFI boot file:              %-36s\n" "${EFIBOOTFILE:-NEEDS SETTING}"
    printf "  Plymouth theme:             %-36s\n" "${PLYMOUTHTHEME:-NONE (textual boot)}"
    printf "  Boot-time keymap:           %-36s\n" "${KEYMAP:-NEEDS SETTING}"
    if [[ "${INITSYSTEM}" == "systemd" ]]; then
        printf "  Init system:                %-36s\n" "systemd"
    else
        printf "  Init system:                %-36s\n" "OpenRC"
    fi
    printf "\n"
}
show_gpg_keyfile_partitions() {
    local LASTITEM=${1:-""}
    declare -i I=0 NUMGPGPARTS="${#GPGUUIDS[@]}"
    if ((NUMGPGPARTS==0)); then
        show "No potential keyfile partitions found on your machine"
    else
        printf "%3s %-36s %-10s %-3s %3s\n" "Num" "Partition UUID" "Path" "Use"
        printf "%s\n" "--- ------------------------------------ ---------- ---"
        for I in "${!GPGUUIDS[@]}"; do
            local INUSE="[ ]"
            if [[ ${KEYFILEPARTUUID:-""} == "${GPGUUIDS[$I]}" ]]; then
                INUSE="[*]"
            fi
            printf "%2d) %-36s %-10s %3s\n" $((I+1)) "${GPGUUIDS[$I]}" \
                "${GPGPARTNAMES[$I]}" "${INUSE}"
        done
    fi
    if [ -n "${LASTITEM}" ]; then
        printf "%2d) %s\n" $((NUMGPGPARTS+1)) "${LASTITEM}"
    fi
}
show_luks_partitions() {
    local LASTITEM=${1:-""}
    declare -i I=0 NUMLUKSPARTS="${#LUKSUUIDS[@]}"
    if ((NUMLUKSPARTS==0)); then
        die "No LUKS partitions found on your machine"
    else
        printf "%3s %-36s %-10s %-3s %3s\n" "Num" "Partition UUID" "Path" "USB" "Use"
        printf "%s\n" "--- ------------------------------------ ---------- --- ---"
        for I in "${!LUKSUUIDS[@]}"; do
            local ISUSB=" N "
            local INUSE="[ ]"
            if ((${LUKSONUSBS[$I]}==1)); then
                ISUSB=" Y "
            fi
            if [[ ${CRYPTPARTUUID:-""} == "${LUKSUUIDS[$I]}" ]]; then
                INUSE="[*]"
            fi
            printf "%2d) %-36s %-10s %-3s %3s\n" $((I+1)) "${LUKSUUIDS[$I]}" \
                "${LUKSPARTNAMES[$I]}" "${ISUSB}" "${INUSE}"
        done
    fi
    if [ -n "${LASTITEM}" ]; then
        printf "%2d) %s\n" $((NUMLUKSPARTS+1)) "${LASTITEM}"
    fi
}
show_efi_system_partitions() {
    local LASTITEM=${1:-""}
    declare -i I=0 NUMEFIPARTS="${#EFIUUIDS[@]}"
    if ((NUMEFIPARTS==0)); then
        die "No EFI system partitions found on your machine"
    else
        printf "%3s %-36s %-10s %-3s %-3s %3s\n" "Num" "Partition UUID" "Path" "USB" "Win" "Use"
        printf "%s\n" "--- ------------------------------------ ---------- --- --- ---"
        for I in "${!EFIUUIDS[@]}"; do
            local ISUSB=" N "
            local INUSE="[ ]"
            local ISWIN=" N "
            local NEXTUUID="${EFIUUIDS[$I]}"
            if ((${EFIONUSBS[$I]}==1)); then
                ISUSB=" Y "
            fi
            if [[ ${EFIPARTUUID:-""} == "${NEXTUUID}" ]]; then
                INUSE="[*]"
            fi
            if ((USINGEFI==0)); then
                ISWIN="???"
            elif [[ "${HASWINBOOTLOADER[${NEXTUUID}]-0}" == "1" ]]; then
                ISWIN=" Y "
            fi
            printf "%2d) %-36s %-10s %-3s %-3s %3s\n" $((I+1)) "${EFIUUIDS[$I]}" \
                "${EFIPARTNAMES[$I]}" "${ISUSB}" "${ISWIN}" "${INUSE}"
        done
    fi
    if [ -n "${LASTITEM}" ]; then
        printf "%2d) %s\n" $((NUMEFIPARTS+1)) "${LASTITEM}"
    fi
}
show_luks_key_status() {
    if [ -n "${LUKSKEYFILE}" ]; then
        show "Using a GPG-encrypted keyfile for LUKS:"
        if [[ ! -v KEYFILEPARTUUID ]]; then
            show " KEYFILEPARTUUID unset: assuming GPG keyfile on EFI system partition"
        else
            show " KEYFILEPARTUUID is currently set to '${KEYFILEPARTUUID}'"
        fi
    else
        show "Using no keyfile, but relying on fallback passphrase for LUKS"
    fi
}
show_efi_boot_file_status() {
    show "EFI boot file path: ${EFIBOOTDIR}/${EFIBOOTFILE}"
    show " (under EFI system partition mountpoint)"
    warn_if_efi_boot_file_clashes_with_windows_bootloader
}
show_boot_splash_status() {
    if [ -n "${PLYMOUTHTHEME}" ]; then
        show "Using Plymouth on boot, with theme '${PLYMOUTHTHEME}'"
        if [ ! "${USE_PLYMOUTH}" ]; then
            warning "${PROGNAME} has been emerged without the plymouth use flag"
            warning "so this setting will be ignored"
        fi
    else
        show "Using textual boot (no Plymouth)"
    fi
}
show_init_system_status() {
    if [[ "${INITSYSTEM}" == "systemd" ]]; then
        show "Targeting systemd init"
    else
        show "Targeting OpenRC init"
    fi
}
set_luks_key_options() {
    local -i DOEXIT=0
    declare -a LUKSKEYMENU=("Use GPG-encrypted keyfile on EFI system partition" \
        "Use GPG-encrypted keyfile on specific USB partition..." \
        "Use fallback passphrase (no keyfile)"  "GO BACK")
    local X
    until ((DOEXIT==1)); do
        show "Current LUKS key settings:"
        show_luks_key_status
        show "Please choose your desired LUKS key setting (or GO BACK):"
        select X in "${LUKSKEYMENU[@]}"; do
            case "${X}" in
                "Use GPG-encrypted keyfile on EFI system partition")
                    if [[ "${LUKSKEYFILE}" != "${DEFAULTLUKSKEYFILE}" || -v KEYFILEPARTUUID ]]; then
                        CONFIGDIRTY=1
                    fi
                    LUKSKEYFILE="${DEFAULTLUKSKEYFILE}"
                    unset -v KEYFILEPARTUUID
                    show "New LUKS key settings:"
                    show_luks_key_status
                    DOEXIT=1
                    break ;;
                "Use GPG-encrypted keyfile on specific USB partition...")
                    set_luks_keyfile_partition
                    DOEXIT=1
                    break ;;
                "Use fallback passphrase (no keyfile)")
                    if [ -n LUKSKEYFILE ]; then
                        CONFIGDIRTY=1
                    fi
                    LUKSKEYFILE=""
                    show "New LUKS key settings:"
                    show_luks_key_status
                    DOEXIT=1
                    break ;;
                "GO BACK") DOEXIT=1; break ;;
                *) warning "Please choose one of the menu options!"; break ;;
            esac
        done
    done
}
set_luks_keyfile_partition() {
    declare -i DOEXIT=0 NUMGPGPARTS="${#GPGUUIDS[@]}"
    local NUMREG='^[0-9]+$'
    until ((DOEXIT==1)); do
        if ((NUMGPGPARTS==0)); then
            warning "No potential keyfile partitions found on your machine"
            warning "(only non-LUKS partitions on USB devices are allowed)"
            warning "Please insert any devices before running ${PROGNAME}"
            return 0
        fi
        show "Please choose which partition contains the GPG keyfile for LUKS:"
        show " (only non-LUKS partitions on USB devices are shown below)"
        show_gpg_keyfile_partitions "GO BACK"
        printf "%s" "${PS3}"
        local N
        read -r N
        if [[ "${N}" =~ ${NUMREG} ]]; then
            if ((N>=1 && N<=NUMGPGPARTS)); then
                # valid partition, set it
                if [[ -v KEYFILEPARTUUID ]]; then
                    if [[ "${KEYFILEPARTUUID}" != "${GPGUUIDS[$((N-1))]}" ]]; then
                        CONFIGDIRTY=1;
                    fi
                else
                    CONFIGDIRTY=1;
                fi
                if [[ "${LUKSKEYFILE}" != "${DEFAULTLUKSKEYFILE}" ]]; then
                    CONFIGDIRTY=1
                fi
                LUKSKEYFILE="${DEFAULTLUKSKEYFILE}"
                KEYFILEPARTUUID="${GPGUUIDS[$((N-1))]}"
                DOEXIT=1;
                show "GPG partition selected as follows:"
                show_gpg_keyfile_partitions
                if [[ -v EFIPARTUUID && "${EFIPARTUUID}" == "${KEYFILEPARTUUID}" ]]; then
                    show "The partition you have selected is also the current EFI system partition"
                    show "You can choose this explicitly in the LUKS key options menu, if you like"
                    show "(unless you intend to change the EFI system partition now)"
                fi
                # check if EFIPARTUUID is set and same; if so, notify user
                # and clear the KEYFILEPARTUUID variable
            elif ((N==1+NUMGPGPARTS)); then
                DOEXIT=1;
            fi
        fi
        if ((DOEXIT==0)); then
            warning "Please choose one of the menu options!"
        fi
    done
}
set_boot_time_keymap() {
    declare -i DOEXIT=0
    declare -a KEYMAPLIST=("azerty" "be" "bg" "br-a" "br-l" "by" "cf" "croat" \
        "cz" "de" "dk" "dvorak" "es" "et" "fi" "fr" "gr" "hu" "il" "is" "it" \
        "jp" "la" "lt" "mk" "nl" "no" "pl" "pt" "ro" "ru" "se" "sg" "sk-y" \
        "sk-z" "slovene" "trf" "trq" "ua" "uk" "us" "wangbe" "sf")
    declare -a KEYMAPMENU=("${KEYMAPLIST[@]}" "GO BACK")
    local X
    until ((DOEXIT==1)); do
        show "Please choose your desired boot-time keymap (or GO BACK):"
        show "Boot-time keymap is currently '${KEYMAP}'"
        select X in "${KEYMAPMENU[@]}"; do
            if [[ ${KEYMAPLIST[@]} =~ (^| )"${X}"($| ) ]]; then
                # valid keymap, set it
                if [[ "${KEYMAP}" != "${X}" ]]; then
                    CONFIGDIRTY=1;
                fi
                KEYMAP="${X}"
                DOEXIT=1;
                show "Keymap selected to be '${KEYMAP}'"
            elif [[ "${X}" == "GO BACK" ]]; then
                DOEXIT=1;
            else
                warning "Please choose one of the menu options!"
            fi
            break
        done
    done
}
set_efi_boot_file_path() {
    # we only present a simplified choice here
    local -i DOEXIT=0
    declare -a EFIBOOTFILEMENU=("Use /EFI/Boot/bootx64.efi (recommended for initial USB install)" \
        "Use /EFI/Microsoft/Boot/bootmgfw.efi (fallback for certain systems)" \
        "Use /EFI/Boot/gentoo.efi (recommended for post-install use)" "GO BACK")
    local X
    until ((DOEXIT==1)); do
        show "Current EFI boot file setting:"
        show_efi_boot_file_status
        show "Please choose your desired EFI boot file setting (or GO BACK):"
        select X in "${EFIBOOTFILEMENU[@]}"; do
            case "${X}" in
                "Use /EFI/Boot/bootx64.efi (recommended for initial USB install)")
                    if [[ "${EFIBOOTDIR}" != "/EFI/Boot" || "${EFIBOOTFILE}" != "bootx64.efi" ]]; then
                        CONFIGDIRTY=1
                    fi
                    EFIBOOTDIR="/EFI/Boot"
                    EFIBOOTFILE="bootx64.efi"
                    show "New EFI boot file setting:"
                    show_efi_boot_file_status
                    DOEXIT=1
                    break ;;
                "Use /EFI/Microsoft/Boot/bootmgfw.efi (fallback for certain systems)")
                    if [[ "${EFIBOOTDIR}" != "/EFI/Microsoft/Boot" || "${EFIBOOTFILE}" != "bootmgfw.efi" ]]; then
                        CONFIGDIRTY=1
                    fi
                    EFIBOOTDIR="/EFI/Microsoft/Boot"
                    EFIBOOTFILE="bootmgfw.efi"
                    show "New EFI boot file setting:"
                    show_efi_boot_file_status
                    DOEXIT=1
                    break ;;
                "Use /EFI/Boot/gentoo.efi (recommended for post-install use)")
                    if [[ "${EFIBOOTDIR}" != "/EFI/Boot" || "${EFIBOOTFILE}" != "gentoo.efi" ]]; then
                        CONFIGDIRTY=1
                    fi
                    EFIBOOTDIR="/EFI/Boot"
                    EFIBOOTFILE="gentoo.efi"
                    show "New EFI boot file setting:"
                    show_efi_boot_file_status
                    DOEXIT=1
                    break ;;
                "GO BACK") DOEXIT=1; break ;;
                *) warning "Please choose one of the menu options!"; break ;;
            esac
        done
    done
}
set_boot_splash_options() {
    # we only present a simplified choice here
    local -i DOEXIT=0
    declare -a BOOTSPLASHMENU=("Use textual boot (no Plymouth)" \
        "Use Plymouth graphical boot splash ('fade-in')" "GO BACK")
    local X
    until ((DOEXIT==1)); do
        show "Current boot splash settings:"
        show_boot_splash_status
        show "Please choose your desired boot splash setting (or GO BACK):"
        select X in "${BOOTSPLASHMENU[@]}"; do
            case "${X}" in
                "Use textual boot (no Plymouth)")
                    if [ -n "${PLYMOUTHTHEME}" ]; then
                        CONFIGDIRTY=1
                    fi
                    PLYMOUTHTHEME=""
                    show "New boot splash settings:"
                    show_boot_splash_status
                    DOEXIT=1
                    break ;;
                "Use Plymouth graphical boot splash ('fade-in')")
                    if [[ "${PLYMOUTHTHEME}" != "fade-in" ]]; then
                        CONFIGDIRTY=1
                    fi
                    PLYMOUTHTHEME="fade-in"
                    show "New boot splash settings:"
                    show_boot_splash_status
                    DOEXIT=1
                    break ;;
                "GO BACK") DOEXIT=1; break ;;
                *) warning "Please choose one of the menu options!"; break ;;
            esac
        done
    done
}
set_init_system() {
    # currently only two option are supported
    local -i DOEXIT=0
    declare -a INITSYSTEMSPLASHMENU=("systemd (select if unsure)" \
        "OpenRC" "GO BACK")
    local X
    until ((DOEXIT==1)); do
        show "Current init system settings:"
        show_init_system_status
        show "Please choose your desired init system setting (or GO BACK):"
        select X in "${INITSYSTEMSPLASHMENU[@]}"; do
            case "${X}" in
                "systemd (select if unsure)")
                    if [[ "${INITSYSTEM}" != "systemd" ]]; then
                        CONFIGDIRTY=1
                    fi
                    INITSYSTEM="systemd"
                    show "New init system settings:"
                    show_init_system_status
                    DOEXIT=1
                    break ;;
                "OpenRC")
                    if [[ "${INITSYSTEM}" != "openrc" ]]; then
                        CONFIGDIRTY=1
                    fi
                    INITSYSTEM="openrc"
                    show "New init system settings:"
                    show_init_system_status
                    DOEXIT=1
                    break ;;
                "GO BACK") DOEXIT=1; break ;;
                *) warning "Please choose one of the menu options!"; break ;;
            esac
        done
    done
}
warn_if_efi_boot_file_clashes_with_windows_bootloader() {
    # we check if our (slash-modified) path + PARTUUID matches any in the
    # existing EFI boot list, which are flagged as being 'windows' boots
    local SMBOOTPATH="${EFIBOOTDIR}/${EFIBOOTFILE}"
    SMBOOTPATH="${SMBOOTPATH//\//\\}" # map to backslash separators
    declare -i FOUNDCLASH=0 I
    for I in "${!EBOOTUUIDS[@]}"; do
        if [[ "${EBOOTUUIDS[$I]}" == "${EFIPARTUUID}" && \
            "${EBOOTPATHS[$I]}" == "${SMBOOTPATH}" && \
            "${EBOOTNAMES[$I],,}" == "windows"* ]]; then
            FOUNDCLASH=1
            break
        fi
    done
    if ((FOUNDCLASH==1)); then
        warning "Your EFI boot file pathname clashes with at least one"
        warning "Windows bootloader in the EFI boot list; consider"
        warning "changing it to /EFI/Boot/gentoo.efi for safety"
        warning "(as otherwise, the Windows bootloader may be overwritten)"
    fi
}
make_key_file_location_expicit_if_necessary_and_wanted() {
    # whenever the EFIPARTUUID is changed, it is possible that an (implicitly
    # defined) KEYFILEPARTUUID should then become explicit - so do this if
    # need be (and warn if so)
    if [[ ! -v KEYFILEPARTUUID && ! -v OLD_KEYFILEPARTUUID && -v EFIPARTUUID &&  \
        -n "${LUKSKEYFILE}" && -n "${OLD_LUKSKEYFILE}" ]]; then
        # key file location implicit, and was implicit on entry, but EFI location defined
        if [[ -v OLD_EFIPARTUUID && "${EFIPARTUUID}" != "${OLD_EFIPARTUUID}" ]]; then
            show "Previously, KEYFILEPARTUUID was unset, and so implicitly followed"
            show "the value of EFIPARTUUID (the EFI system partition)."
            show "Now you have changed EFIPARTUUID, you must choose what to do"
            show "about the keyfile."
            
            local -i DOEXIT=0
            declare -a KEYFILEMENU=("Keep keyfile in previous EFI system partition" \
                "Move keyfile to new EFI system partition (retain implicit tracking)")
            local X
            until ((DOEXIT==1)); do
                show "Please choose your desired option:"
                select X in "${KEYFILEMENU[@]}"; do
                    case "${X}" in
                        "Keep keyfile in previous EFI system partition")
                            show "OK, explicitly defining KEYFILEPARTUUID now"
                            KEYFILEPARTUUID="${OLD_EFIPARTUUID}"
                            DOEXIT=1
                            break ;;
                        "Move keyfile to new EFI system partition (retain implicit tracking)")
                            show "OK, the init scripts will look for the keyfile in the newly"
                            show "specified EFI system partition now (once you rebuild the kernel)"
                            show "You will asked whether to physically copy over the keyfile"
                            show "when you select 'Save and exit' from the main menu" 
                            DOEXIT=1
                            break ;;
                        *) warning "Please choose one of the menu options!"; break ;;
                    esac
                done
            done
        fi
    fi
}
copy_file_from_partition_to_partition() {
    # used to copy files from one partition to another
    # prints a warning only if not successful (you can specify text of this)
    # if mounted on entry, a partition will remain so on exit
    # if unmounted on entry, the partition will be unmounted again on exit
    local FROMPARTUUID="${1,,}"
    local FROMPATH="${2}" # path relative to mountpoint, starting with /
    local TOPARTUUID="${3,,}"
    local TOPATH="${4}" # path relative to mountpoint, starting with /
    local ONSUCCESSTEXT="${5}"
    local ONERRORTEXT="${6}"
    local COPYFLAGS=${7:-"--force"}
    declare -i FROMPARTMOUNTEDONENTRY=0 TOPARTMOUNTEDONENTRY=0
    declare -i DIDMOUNTFROM=0 DIDMOUNTTO=0
    # both of these UUIDs need to be in the /dev/disk/by-partuuid list
    # or it's no go
    local FROMEFIPARTPATH="${PARTUUIDDEVDIR}/${FROMPARTUUID}"
    local TOEFIPARTPATH="${PARTUUIDDEVDIR}/${TOPARTUUID}"
    if [[ ! -e "${FROMEFIPARTPATH}" || ! -e "${TOEFIPARTPATH}" ]]; then
        warning "${ONERRORTEXT}"
        return 0
    fi
    local FROMPARTNAME="$(readlink --canonicalize "${FROMEFIPARTPATH}")" # e.g. /dev/sda3
    local TOPARTNAME="$(readlink --canonicalize "${TOEFIPARTPATH}")" # e.g. /dev/sdb3
    local ALLMOUNTEDPARTS="$(df -P)"
    local FROMMOUNT="$(grep "^${FROMPARTNAME}" <<<"${ALLMOUNTEDPARTS}" | perl -pe 's/^(\S+\s+){5}//')" 
    local TOMOUNT="$(grep "^${TOPARTNAME}" <<<"${ALLMOUNTEDPARTS}" | perl -pe 's/^(\S+\s+){5}//')"
    if [ -n "${FROMMOUNT}" ]; then
        FROMPARTMOUNTEDONENTRY=1
    fi
    if [ -n "${TOMOUNT}" ]; then
        TOPARTMOUNTEDONENTRY=1
    fi
    if ((FROMPARTMOUNTEDONENTRY==0)); then
        FROMMOUNT=$(mktemp -d)
        if mount_and_remember "${FROMPARTNAME}" "${FROMMOUNT}"; then
            DIDMOUNTFROM=1
        else
            warning "Failed to mount ${FROMPARTNAME}"
        fi
    fi
    if ((TOPARTMOUNTEDONENTRY==0)); then
        if [[ "${FROMPARTUUID}" != "${TOPARTUUID}" ]]; then
            TOMOUNT=$(mktemp -d)
            if mount_and_remember "${TOPARTNAME}" "${TOMOUNT}"; then
                DIDMOUNTTO=1
            else
                warning "Failed to mount ${TOPARTNAME}"
            fi
        else
            TOMOUNT="${FROMMOUNT}"
        fi
    fi
    local TODIR="$(dirname "${TOPATH}")"
    if [[ "${TODIR}" != "/" ]]; then
        # ensure parent directories exist
        mkdir --parents --verbose "${TOMOUNT}${TODIR}"
    fi
    
    cp ${COPYFLAGS} "${FROMMOUNT}${FROMPATH}" "${TOMOUNT}${TOPATH}" && \
        show "${ONSUCCESSTEXT}" || warning "${ONERRORTEXT}"
    sync
    # now unmount, if we mounted
    if ((DIDMOUNTTO==1)); then
        umount_and_forget "${TOMOUNT}"
        rmdir "${TOMOUNT}"
    fi
    if ((DIDMOUNTFROM==1)); then
        umount_and_forget "${FROMMOUNT}"
        rmdir "${FROMMOUNT}"
    fi
}
ask_whether_to_proceed() {
    show "Secure-bootable EFI kernel build script"
    check_is_luks_volume "${CRYPTPATHMAP}"
    if ((ARG_COPYFROMSTAGING==1)); then
        show "Will copy built kernel from ${BOOTDIR} to ${FULLEFIBOOTDIR}"
    else
        show "Will build ${NEWVERSION}; running kernel is ${CURRENTVERSION}"
        if ((ARG_STAGEONLY)); then
            show "(will build in ${BOOTDIR} (staging) only)"
        fi
    fi
    # if in non-interactive mode, proceed automatically
    if ((ARG_ASK==1)); then
        continue_yn "Do you want to proceed"
    fi
}
conform_efi_boot_order_if_possible() {
    # checks if we have been booted under UEFI, and, if so, whether or not
    # the EFIBOOTNAME is present, accurate, active, and at the top of the boot
    # order; if all these conditions are met, does nothing, otherwise, deletes
    # any old (clashing) entry for the EFIBOOTNAME, and inserts a new one
    # (which automatically starts off active and at the top of the list)
    if ((USINGEFI==0)); then
        warning "Your system is not currently booted under EFI"
        warning "As such, unable to set EFI stub kernel in boot list"
        if [[ ( "${EFIBOOTFILE}" == "bootx64.efi" && "${EFIBOOTDIR}" ==  "/EFI/Boot" ) || \
            ( "${EFIBOOTFILE}" == "bootmgfw.efi" && "${EFIBOOTDIR}" == "/EFI/Microsoft/Boot" ) ]]; then
            warning "Manually select device using BIOS, to boot this kernel"
            if [[ "${EFIBOOTFILE}" == "bootx64.efi" ]]; then
                warning "If unsuccessful, try using /EFI/Microsoft/Boot/bootmgfw.efi instead"
            else
                warning "If unsuccessful, try using /EFI/Boot/bootx64.efi instead"
            fi
        else
            warning "Non-standard boot path specified!"
            warning "Manually select boot file using BIOS or EFI shell"
        fi
        # nothing more we can do
        return 0
    fi
    if ((EFIBOOTENTRIESSEARCHED==0)); then
        find_all_efi_boot_entries
    fi
    # are we already at the top?
    declare -i NEWBOOTENTRYNEEDED=1
    local SMBOOTPATH="${EFIBOOTDIR}/${EFIBOOTFILE}"
    # locate the EFIPARTUUID, if possible
    local EFIPARTPATH="${PARTUUIDDEVDIR}/${EFIPARTUUID}"
    if [ ! -e "${EFIPARTPATH}" ]; then
        warning "EFIPARTUUID (${EFIPARTUUID}) not found on system"
        warning "Cannot conform EFI boot list"
        warning "Ensure EFIPARTUUID is correct, USB device (if appropriate) is"
        warning "inserted, and try again"
        # nothing more we can do
        return 0
    fi
    # ok we do know about this partition, so find out its device path and
    # partition number, as we'll need this to invoke efibootmgr
    local PARTNAME="$(readlink --canonicalize "${EFIPARTPATH}")" # e.g. /dev/sda3
    local DEVNAME="${PARTNAME%%[[:digit:]]*}"             # e.g. /dev/sda
    local PARTNUM="${PARTNAME##*[^[:digit:]]}"            # e.g. 3
    local BOOTLABEL
    # label will reflect if desired EFI partition is on USB or not
    if partuuid_is_on_usb_device "${EFIPARTUUID}"; then
        BOOTLABEL="Gentoo Linux (USB Key)"
    else
        BOOTLABEL="Gentoo Linux (Internal Drive)"
    fi
    SMBOOTPATH="${SMBOOTPATH//\//\\}" # map boot file path to backslash separators
    declare -i NUMBOOTORDERS="${#EBOOTORDER[@]}"
    if ((NUMBOOTORDERS>0)); then
        local FIRSTBOOTID="${EBOOTORDER[0]}"
        # look this up - it may not match if the top item is e.g. a net boot
        if [[ "${EBOOTIDTOINDEX[${FIRSTBOOTID}]+_}" ]]; then
            declare -i IX="${EBOOTIDTOINDEX[${FIRSTBOOTID}]}"
            # now check if this boot matches what we want; if so, leave it alone
            if [[ "${EBOOTNAMES[${IX}]}" == "${BOOTLABEL}" && \
                "${EBOOTPATHS[${IX}]}" == "${SMBOOTPATH}" && \
                "${EBOOTUUIDS[${IX}]}" == "${EFIPARTUUID}" && \
                "${EBOOTISACTIVES[${IX}]}" == "1" ]]; then
                # all criteria met!
                NEWBOOTENTRYNEEDED=0
            fi
        fi
    fi
    if ((NEWBOOTENTRYNEEDED==1)); then
        # remove any existing bootnums with the same name first
        declare -i I=0
        for I in "${!EBOOTNAMES[@]}"; do
            if [[ "${EBOOTNAMES[${I}]}" == "${BOOTLABEL}" ]]; then
                show "Deleting conflicting boot entry ${EBOOTIDS[${I}]} ('${EBOOTNAMES[${I}]}')"
                efibootmgr --quiet --delete-bootnum --bootnum "${EBOOTIDS[${I}]}"
            fi
        done
        show "Adding ('${BOOTLABEL}') to top of the EFI boot list"
        efibootmgr --create --disk "${DEVNAME}" --part "${PARTNUM}" --loader "${SMBOOTPATH}" --label "${BOOTLABEL}"
    else
        show "Appropriate entry already exists at the top of EFI boot list"
    fi
}
check_key_file_if_on_efi_system_partition () {
    # We check for the presence of a key file ONLY if it is on the EFI system 
    # partition, as this must be mounted on entry to this function
    if [ -n "${LUKSKEYFILE}" ]; then
        if [[ "${KEYFILEPARTUUID}" == "${EFIPARTUUID}" ]]; then
            # keyfile should be on our already-mounted partition
            if [ ! -s "${EFIROOTDIR}/${LUKSKEYFILE}" ]; then
                die "The ${EFIPARTNAME} does not contain a LUKS key file"
            fi
        else
            warning "Your keyfile partition is != the EFI system partition"
            warning "Please ensure that ${LUKSKEYFILE} is present, on partition"
            warning "${KEYFILEPARTUUID},"
            warning "before attemping to reboot"
        fi
    fi
}
ensure_efi_partition_mounted() {
    MOUNTEDONENTRY=0
    if mount | grep -q " ${EFIROOTDIR} " > /dev/null; then
        # check it is the correct partition, otherwise unmount it (to stop bad
        # things happening in the case where the user leaves an old partition 
        # mounted, changes the EFIPARTUUID in /etc/buildkernel.conf, then runs
        # buildkernel)
        local MOUNTEDPARTUUID="$(lsblk --noheadings --list --output="MOUNTPOINT,PARTUUID" | grep "^${EFIROOTDIR}[[:space:]]" | awk '{print $2;}')"
        MOUNTEDPARTUUID="${MOUNTEDPARTUUID,,}"
        if [[ "${MOUNTEDPARTUUID}" == "${EFIPARTUUID}" ]]; then
            # remember original mount status, so we can maintain it later if needed
            MOUNTEDONENTRY=1
        else
            warning "Wrong PARTUUID mounted on ${EFIROOTDIR}:"
            warning " Have: ${MOUNTEDPARTUUID}"
            warning " Want: ${EFIPARTUUID}"
            warning " Unmounting"
            sync
            umount_and_forget "${EFIROOTDIR}"
        fi
    fi
    if ((MOUNTEDONENTRY==0)); then
        show "The ${EFIPARTNAME} is not mounted."
        show "(If using a USB key to boot from, please ensure it is inserted)"
        if ((ARG_ASK==1)); then
            continue_yn "Would you like to mount it now"
        else
            show "Attemping to mount it..."
        fi
        if ! mount_and_remember "${EFIPATHMAP}" "${EFIROOTDIR}" "vfat"; then
            die "Failed to mount ${EFIPATHMAP}"
        fi
    fi
    check_partuuid_exists "${EFIPARTUUID}"
    if partuuid_is_on_usb_device "${EFIPARTUUID}"; then
        USINGUSBKEYFOREFI=1
        EFIPARTNAME="EFI boot USB key"
    else
        USINGUSBKEYFOREFI=0
    fi
    check_key_file_if_on_efi_system_partition
}
enter_build_directory() {
    show "Proceeding - entering ${LINUXDIR}..."
    cd "${LINUXDIR}"
}
check_if_deblobbing() {
    # run in kernel top-level directory
    local EV=$(grep "^EXTRAVERSION =" Makefile)
    if grep -q "\-gnu$" <<<"${EV}"; then
        # we are deblobbing - fix up the initramfs name
        show "Using a deblobbed kernel"
        INITRAMFSNAME+="-gnu"
    fi
}
copy_config_from_proc_if_necessary () {
    if [ ! -s "${TARGETCONFIG}" ]; then
        if ((ARG_ASK==1)); then
            continue_yn "There is no .config file; use current (${CURRENTVERSION}) config"
        else
            show "No .config file found; using current (${CURRENTVERSION}) config"
        fi
        # requires that the kernel has support for config in /proc
        check_file_exists "${CURRENTCONFIG}"
        zcat "${CURRENTCONFIG}" > "${TARGETCONFIG}"
        if ((ARG_ASK==1)); then
            show "Updating old config using make ${CONFIGUPDATETYPE}"
            if [ "${CONFIGUPDATETYPE}" != "${SILENTUPDATETYPE}" ]; then
                show "Please answer all questions as and if prompted..."
            fi
            make "${CONFIGUPDATETYPE}"
        else
            # non-interactive mode, so we have to go silent
            show "Updating old config using make ${SILENTUPDATETYPE}"
            make "${SILENTUPDATETYPE}"
        fi
    fi
}
conform_config_file() {
    if [[ "${INITSYSTEM}" == "openrc" ]]; then
        show "Although we are targeting OpenRC init, systemd kernel flags will"
        show "still be set, to provide future flexibility"
    fi
    show "Setting Gentoo flags for systemd..."
    # our initial init is a script on the initramfs, which then hands off to
    # systemd or openrc...
    set_kernel_config_list_to_y "GENTOO_LINUX GENTOO_LINUX_UDEV GENTOO_LINUX_INIT_SCRIPT GENTOO_LINUX_INIT_SYSTEMD"
    # set up a few additional flags recommended in the wiki, but not forced on
    # by the above
    show "Setting additional recommended settings for systemd..."
    # we omit IPV6 here - turn on manually if you want it
    set_kernel_config_list_to_y "SECCOMP DMIID TMPFS_POSIX_ACL"
    set_kernel_config "UEVENT_HELPER_PATH" ""
    set_kernel_config_list_to_y "AUDIT AUDITSYSCALL"
    show "Setting kernel command line = '${KERNEL_CMD_LINE}'..."
    set_kernel_config "CMDLINE_BOOL" "y"
    set_kernel_config "CMDLINE" "\"${KERNEL_CMD_LINE}\""
    show "Setting up initramfs location and type..."
    set_kernel_config "INITRAMFS_SOURCE" "\"${UNCOMPRESSEDINITRAMFS}\""
    # initramfs compression must be 'none' - not as big a deal as it sounds,
    # since the encapsulating kernel image will itself be compressed...
    for COMP_TYPE in "GZIP" "BZIP2" "LZMA" "XZ" "LZO"; do
        unset_kernel_config "INITRAMFS_COMPRESSION_${COMP_TYPE}"
    done
    set_kernel_config "INITRAMFS_COMPRESSION_NONE" "y"
    # ensure we can get at the LUKS volume! note that these could also be
    # modules really, since we copy all modules into the initramfs
    show "Ensuring Serpent, Whirlpool and SHA-512 are included..."
    set_kernel_config_list_to_y "CRYPTO_SERPENT CRYPTO_WP512 CRYPTO_SHA512"
    show "Ensuring device mapper and crypt target support are included..."
    set_kernel_config_list_to_y "BLK_DEV_DM DM_CRYPT"
    show "Ensuring kernel makes config available under /proc..."
    set_kernel_config_list_to_y "IKCONFIG IKCONFIG_PROC"
    show "Setting options needed for EFI / stub loading..."
    set_kernel_config_list_to_y "PARTITION_ADVANCED EFI_PARTITION EFI EFIVAR_FS EFI_VARS EFI_STUB"
    show "Enabling real-time-clock support..."
    set_kernel_config_list_to_y "RTC_CLASS RTC_HCTOSYS RTC_SYSTOHC"
    set_kernel_config "RTC_HCTOSYS_DEVICE" "rtc0"
    set_kernel_config_list_to_y "RTC_INTF_SYSFS RTC_INTF_PROC RTC_INTF_DEV RTC_DRV_CMOS"
    show "Enabling suspend and hibernation support..."
    set_kernel_config_list_to_y "SUSPEND HIBERNATION"
    show "Ensuring deprecated sysfs support turned off..."
    unset_kernel_config "SYSFS_DEPRECATED"
    # turn off penguin logo at boot if using Plymouth
    if [ -n "${PLYMOUTHTHEME}" ]; then
        show "Plymouth in use: ensuring penguin boot logo is disabled..."
        unset_kernel_config "LOGO"
    fi
    # you can define user_conform_config_file in your buildkernel.conf file...
    if fn_exists user_conform_config_file; then
        show "Calling user_conform_config_file function..."
        (user_conform_config_file)
    fi
}
allow_user_to_modify_config_graphically() {
    # make menuconfig (and friends) will sort out any dependencies resulting
    # from calling conform_config_file(), before the UI is presented
    if ((ARG_MENUCONFIG==1)); then
        # force the menuconfig, no matter whether interactive or not
        alertshow "Executing make ${CONFIGTYPE}; select the kernel options you require..."
        make ${CONFIGTYPE}
    elif ((ARG_ASK==1)); then
        # interactive mode
        if test_yn "Would you like to modify the configuration using the editor"; then
            show "Executing make ${CONFIGTYPE}; select the kernel options you require..."
            make ${CONFIGTYPE}
        else
            show "OK, autoconforming configuration using make ${CONFIGUPDATETYPE} instead..."
            make ${CONFIGUPDATETYPE}        
        fi
    else
        # non-interactive mode
        show "Autoconforming configuration using make ${SILENTUPDATETYPE}..."
        make ${SILENTUPDATETYPE}
    fi
}
set_kernel_config() {
    # flag as $1, value to set as $2, config must exist at "./.config"
    local TGT="CONFIG_${1}"
    local REP="${2//\//\\/}"
    if grep -q "^${TGT}[^_]" .config; then
        sed -ir "s/^\(${TGT}=.*\|# ${TGT} is not set\)/${TGT}=${REP}/" .config
    else
        echo "${TGT}=${2}" >> .config
    fi
}
set_kernel_config_list_to_y() {
    # force all in list to 'y'
    local x
    for x in ${1}; do
        set_kernel_config "${x}" "y"
    done
}
unset_kernel_config() {
    # unsets flag with the value of $1, config must exist at "./.config"
    local TGT="CONFIG_${1}"
    sed -ir "s/^${TGT}=.*/# ${TGT} is not set/" .config
}
clean_kernel_tree_if_desired() {
    declare -i DOCLEAN="${ARG_CLEAN}"
    if ((DOCLEAN==0 && ARG_ASK==1)); then
        if test_yn "Do a 'make clean' prior to build"; then
            DOCLEAN=1
        fi
    fi
    if ((DOCLEAN==1)); then
        show "Cleaning up..."
        make clean # not mrproper - so our .config file will be left alone
    fi
}
kernel_build_pass_1() {
    # touch ramdisk decompressed image file first, so that the
    # kernel has something to include for the first run
    rm ${VERBOSITYFLAG} -f "${UNCOMPRESSEDINITRAMFS}"
    touch "${UNCOMPRESSEDINITRAMFS}"
    show "Building ${NEWVERSION} (pass 1 - dummy initramfs)..."
    make modules_prepare
    make -j ${NUMCPUSPLUSONE}
    make install
    show "Installing modules..."
    make modules_install
    show "Installing firmware..."
    make firmware_install
}
rebuild_external_modules_if_necessary() {
    if ((ARG_REBUILD_EXTERNAL_MODULES==1)); then
        show "Creating any necessary external modules (e.g., VirtualBox)..."
        if ! emerge ${VERBOSITYFLAG} @module-rebuild; then
            if MAKEOPTS="${MAKEOPTS-} -j1" emerge --resume; then
                warning "emerge @module-rebuild completed successfully, but only by restricting"
                warning "build parallelism"
            else
                warning "Failed to complete emerge @module-rebuild due to error"
                warning "Continuing..."
            fi
        fi
    fi
}
create_initramfs_using_genkernel() {
    show "Creating initramfs (uncompressed)..."
    # this is a partial use of genkernel, we don't use it to build the kernel
    # itself; also note, EFI kernels *require* an uncompressed ramdisk
    # we suppress gpg here as we don't want to add gpg v2 which is installed,
    # but rather our static gpg v1, which will be inserted into the initramfs
    local PLYMOUTH_OPTS=""
    if [ -n "${PLYMOUTHTHEME}" ]; then
        PLYMOUTH_OPTS="--plymouth --plymouth-theme=${PLYMOUTHTHEME}"
    fi
    local POSTCLEAR_FLAG=""
    if ((ARG_POSTCLEAR==1)); then
        POSTCLEAR_FLAG="--postclear" # clear all caches after genkenrel run
    fi
    genkernel --install --no-mountboot \
        --luks --lvm  --no-gpg --udev ${POSTCLEAR_FLAG} \
        --kernel-config="${TARGETCONFIG}" --busybox \
        --no-compress-initramfs --all-ramdisk-modules --firmware \
        ${PLYMOUTH_OPTS} initramfs
    cp ${VERBOSITYFLAG} "${BOOTDIR}/${INITRAMFSNAME}" "${UNCOMPRESSEDINITRAMFS}"
}
unpack_initramfs() {
    show "Unpacking initramfs cpio archive to ${INITRAMFSDIR}..."
    if [ ! -d "${INITRAMFSDIR}" ]; then
        mkdir "${INITRAMFSDIR}"
    else
        rm ${VERBOSITYFLAG} -rf "${INITRAMFSDIR}"/* # wipe any old data
    fi
    (cd "${INITRAMFSDIR}"; cpio --extract --file="${UNCOMPRESSEDINITRAMFS}")
}
build_static_gpg() {
    # gnupg not slotted unfortunately, so we do this instead
    show "Building static gpg 1.x for use in initramfs..."
    emerge ${VERBOSITYFLAG} "app-crypt/staticgpg"
}
modify_initramfs() {
    if [ ! -x "${GPG1PATHFROM}" ]; then
        if ((ARG_ASK==1)); then
            continue_yn "No static gpg found, would you like to build it?"
        else
            show "No static gpg found, so creating one..."
        fi
        build_static_gpg
    fi
    show "Copying static gpg program into initramfs..."
    cp ${VERBOSITYFLAG} "${GPG1PATHFROM}" "${GPG1PATHTO}"
    show "Copying contents of ${MODPROBEDIR} directory into initramfs..."
    if [ "$(ls -A ${MODPROBEDIR})" ]; then
        cp ${VERBOSITYFLAG} "${MODPROBEDIR}"/* "${INITRAMFSDIR}${MODPROBEDIR}/"
    fi
    # you can define user_modify_initramfs in your buildkernel.conf file...
    if fn_exists user_modify_initramfs; then
        show "Calling user_modify_initramfs function..."
        (user_modify_initramfs)
    fi
}
repack_initramfs() {
    show "Deleting old initramfs cpio archive, and repacking..."
    rm ${VERBOSITYFLAG} -f "${UNCOMPRESSEDINITRAMFS}" "${BOOTDIR}/${INITRAMFSNAME}"
    (cd "${INITRAMFSDIR}"; find . | cpio -H newc --create > "${UNCOMPRESSEDINITRAMFS}")
    cp ${VERBOSITYFLAG} "${UNCOMPRESSEDINITRAMFS}" "${BOOTDIR}/${INITRAMFSNAME}"
}
kernel_build_pass_2() {
    show "Building ${NEWVERSION} (pass 2, to include real initramfs)..."
    make -j ${NUMCPUSPLUSONE}
    show "Installing boot files to ${BOOTDIR}; for reference only..."
    make install
    # no need to re-install modules or firmware - only the initramfs has changed
}
sign_kernel_if_possible() {
    if [ -s "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}" ]; then
        show "Removing old signed kernel ${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}"
        rm ${VERBOSITYFLAG} "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}"
    fi
    if [ -s "${SECUREBOOTKEY}" -a -s "${SECUREBOOTCERT}" ]; then
        show "Signing kernel"
        sbsign --key "${SECUREBOOTKEY}" --cert "${SECUREBOOTCERT}" \
            --output "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}" \
            "${BOOTDIR}/${VMLINUZNAME}"
    else
        warning "No key / certificate present in ${SECUREBOOTKEY}"
        warning "This kernel will only boot in unsecured EFI mode!"
    fi
}
purge_old_backup_kernel_and_config_if_present() {
    local FILEPREFIX=${1:-""}
    rm -rf "${FULLEFIBOOTDIR}/${FILEPREFIX}${EFIBOOTFILE}${OLDSUFFIX}"
    rm -rf "${FULLEFIBOOTDIR}/${FILEPREFIX}${EFICONFIGFILE}${OLDSUFFIX}"
}
check_if_enough_disk_space_for_backups() {
    # do the best we can - if using an existing (Windows) EFI system partition
    # (and an unshrunk kernel) things may be tight
    declare -i OLDKERNSIZEKB=0 OLDCONFIGSIZEKB=0
    declare -i NEWKERNSIZEKB=0 NEWCONFIGSIZEKB=0
    declare -i FREESPACEKB="$(df -k "${EFIROOTDIR}" | tail -n 1 | awk '{print $4}' | sed 's/[Kk]//g')"
    # introduce a safety factor for file overhead etc
    FREESPACEKB=$((FREESPACEKB*90/100))
    if [ -s "${FULLEFIBOOTDIR}/${EFIBOOTFILE}" ]; then
        OLDKERNSIZEKB="$(stat --format="%s" "${FULLEFIBOOTDIR}/${EFIBOOTFILE}")"
        OLDKERNSIZEKB=$((OLDKERNSIZEKB/1024))
    fi 
    if [ -s "${FULLEFIBOOTDIR}/${EFICONFIGFILE}" ]; then
        OLDCONFIGSIZEKB="$(stat --format="%s" "${FULLEFIBOOTDIR}/${EFICONFIGFILE}")"
        OLDCONFIGSIZEKB=$((OLDCONFIGSIZEKB/1024))
    fi
    if [ -s "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}" ]; then
        NEWKERNSIZEKB="$(stat --format="%s" "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}")"
    else
        NEWKERNSIZEKB="$(stat --format="%s" "${BOOTDIR}/${VMLINUZNAME}")"
    fi
    NEWKERNSIZEKB=$((NEWKERNSIZEKB/1024))
    NEWCONFIGSIZEKB="$(stat --format="%s" "${TARGETCONFIG}")"
    NEWCONFIGSIZEKB=$((NEWCONFIGSIZEKB/1024))
    declare -i TOTALNEWKB=$((NEWKERNSIZEKB+NEWCONFIGSIZEKB))
    declare -i TOTALOLDKB=0
    if ((BACKUPOLDKERNEL==1)); then
        TOTALOLDKB+=$((OLDKERNSIZEKB+OLDCONFIGSIZEKB))
    fi
    declare -i TOTALREQKB=$((TOTALOLDKB+TOTALNEWKB))
    if ((TOTALNEWKB>FREESPACEKB)); then
        # would we have enough if we deleted the old files?
        declare -i RECOVERABLEKB=0
        if [ -s "${FULLEFIBOOTDIR}/${EFIBOOTFILE}" ]; then
            RECOVERABLEKB+="$(stat --format="%s" "${FULLEFIBOOTDIR}/${EFIBOOTFILE}")"
        fi
        if [ -s "${FULLEFIBOOTDIR}/${EFICONFIGFILE}" ]; then
            RECOVERABLEKB+="$(stat --format="%s" "${FULLEFIBOOTDIR}/${EFICONFIGFILE}")"
        fi
        if ((TOTALNEWKB<=(FREESPACEKB+RECOVERABLEKB))); then
            # purge them now
            warning "Deleting previous kernel and configuration from EFI"
            warning "system partition, to save space"
            rm -vf "${FULLEFIBOOTDIR}/${EFIBOOTFILE}"
            rm -vf "${FULLEFIBOOTDIR}/${EFICONFIGFILE}"
            FREESPACEKB+="${RECOVERABLEKB}"
            # obviously, nothing to back up now!
            warning "Suppressing backup on this run"
            BACKUPOLDKERNEL=0
        else
            die "Insufficient space to copy kernel onto EFI system partition!"
        fi
    fi
    if ((TOTALREQKB>FREESPACEKB)); then
        warning "Insufficient space to backup prior kernel"
        warning "Suppressing backup on this run"
        BACKUPOLDKERNEL=0
    fi
}
backup_prior_efi_kernel_if_present() {
    local FILEPREFIX=${1:-""}
    # first, make sure the directory exists!
    mkdir -pv "${FULLEFIBOOTDIR}"
    if ((BACKUPOLDKERNEL==1)); then
        # now backup any prior kernel
        if [ -s "${FULLEFIBOOTDIR}/${EFIBOOTFILE}" ]; then
            show "Backing up old bootfile in case of failure..."
            cp ${VERBOSITYFLAG} -f "${FULLEFIBOOTDIR}/${EFIBOOTFILE}" "${FULLEFIBOOTDIR}/${FILEPREFIX}${EFIBOOTFILE}${OLDSUFFIX}"
        fi
    fi
}
backup_prior_config_if_present() {
    local FILEPREFIX=${1:-""}
    if ((BACKUPOLDKERNEL==1)); then
        if [ -s "${FULLEFIBOOTDIR}/${EFICONFIGFILE}" ]; then
            show "Backing up old config in case of failure..."
            cp ${VERBOSITYFLAG} -f "${FULLEFIBOOTDIR}/${EFICONFIGFILE}" "${FULLEFIBOOTDIR}/${FILEPREFIX}${EFICONFIGFILE}${OLDSUFFIX}"
        fi
    fi
}
copy_new_efi_kernel_to_efi_partition() {
    show "Copying EFI-bootable kernel $NEWVERSION to EFI directory..."
    if [ -s "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}" ]; then
        cp ${VERBOSITYFLAG} "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}" "${FULLEFIBOOTDIR}/${EFIBOOTFILE}"
    else
        cp ${VERBOSITYFLAG} "${BOOTDIR}/${VMLINUZNAME}" "${FULLEFIBOOTDIR}/${EFIBOOTFILE}"
    fi
}
copy_new_config_to_efi_partition() {
    show "Copying .config file to EFI directory (for reference only)..."
    cp ${VERBOSITYFLAG} "${TARGETCONFIG}" "${FULLEFIBOOTDIR}/${EFICONFIGFILE}"
}
finalize_efi_partition_and_unmount_if_desired() {
    show "Syncing filesystem..."
    sync
    echo
    declare -i DOUNMOUNT=0
    
    if ((ARG_UNMOUNTATEND==1)); then
        # this trumps everything else
        DOUNMOUNT=1
    else
        if ((ARG_ASK==1)); then
            # check with user what to do
            if test_yn "Completed: would you like to unmount the ${EFIPARTNAME} now"; then
                DOUNMOUNT=1
            fi
        else
            # leave things how we found them
            if ((MOUNTEDONENTRY==0)); then
                DOUNMOUNT=1;
            fi
        fi
    fi
    if ((DOUNMOUNT==1)); then
        umount_and_forget "${EFIROOTDIR}"
        if ((USINGUSBKEYFOREFI==1)); then
            show "Unmounted, it is now safe to remove the ${EFIPARTNAME}"
        fi
    else
        if ((ARG_ASK==0)); then
            show "The ${EFIPARTNAME} has been left mounted"
        else
            show "OK, the ${EFIPARTNAME} has been left mounted"
        fi
    fi
}
display_final_status() {
    show "All done!"
    if ((ARG_STAGEONLY==1)); then
        show "  (Remember to run again with the --copy-from-staging option, to install"
        show "   to the EFI system partition)"
    fi
}
if_option_has_value() {
    # execute third argument as function, if the variable *named by* the second
    # argument has the value passed in the first argument
    # remaining arguments (if any) will be passed to the invoked function
    declare -i ARG TESTVAL
    TESTVAL="${1}"
    shift
    eval ARG="\$${1}" # bash indirect reference
    shift
    if ((ARG==TESTVAL)); then
        local TORUN="${1}"
        shift
        # execute the command with the remaining arguments
        "${TORUN}" "${@}"
    fi
}
if_option_set() {
    # execute second argument as function if variable named by the first
    # argument has value 1
    if_option_has_value 1 "${@}"
}
if_option_unset() {
    # execute second argument as function if variable named by the first
    # argument has value 0
    if_option_has_value 0 "${@}"
}
print_usage() {
    cat << EOF
Usage: ${PROGNAME} [options]

Options:
  -a, --ask             turns on interactive mode: you must confirm key actions
  -A, --alert           sound terminal bell when interaction required
                        (selecting this also automatically selects --ask)
  -b, --snapshot-backup make a datestamped kernel / configuration backup on EFI
                        system partition (to keep a last-known-good version)
  -c, --clean           do a make clean at the beginning of kernel build
  -e, --easy-setup      invoke a simple, menu-driven setup for buildkernel.conf
  -f, --copy-from-staging
                        use this option after compiling a kernel with
                        --stage-only, to copy it to the EFI system partition
  -h, --help            show this help message and exit
  -i, --is-new-kernel-available
                        return with code 0 if the currently-running kernel has
                        a different version from that built in the staging area
                        (at /boot), or 1 otherwise
  -m, --menuconfig      show kernel configuration GUI, even if non-interactive
  -p, --postclear       clear genkernel temporary files and caches after run
  -s, --stage-only      prepare kernel in /boot as usual, but do not copy 
                        to system partition
  -u, --unmount-at-end  umount the EFI system partition on successful exit
  -v, --verbose         display more information, where possible
  -x, --rebuild-external-modules
                        rebuild external modules if present
  -V, --version         display the version number of ${PROGNAME} and exit
EOF
}
print_help() {
    cat << EOF
${PROGNAME} - build a secure boot kernel and save to EFI system partition
EOF
    print_usage
}
print_version() {
    printf "%s\n" "${VERSION}"
}
display_usage_message_and_bail_out() {
    if [ ! -z "${1+x}" ]; then
        printf "%s: %s\n" "${PROGNAME}" "${1}" >&2
    fi
    print_usage >&2
    cleanup_and_exit_with_code 1
}
internal_consistency_option_checks() {
    # following not exhaustive, just some more obvious snafus
    if ((ARG_STAGEONLY==1 && ARG_COPYFROMSTAGING==1)); then
        display_usage_message_and_bail_out "cannot set both --copy-from-staging and --stage-only"
    fi
    if ((ARG_CLEAN==1 && ARG_COPYFROMSTAGING==1)); then
        display_usage_message_and_bail_out "--clean is meaningless with --copy-from-staging"
    fi
    if ((ARG_STAGEONLY==1 && ARG_UNMOUNTATEND==1)); then
        display_usage_message_and_bail_out "--unmount-at-end is meaningless with --stage-only"
    fi
    if ((ARG_MENUCONFIG==1 && ARG_COPYFROMSTAGING==1)); then
        display_usage_message_and_bail_out "--menuconfig if meaningless with --copy-from-staging"
    fi
}
snapshot_kernel_on_efi_partition() {
    local TIMESTAMP_PREFIX=$(date +"%Y-%m-%d-%H-%M-%S-")
    ensure_efi_partition_mounted
    backup_prior_efi_kernel_if_present "${TIMESTAMP_PREFIX}"
    backup_prior_config_if_present "${TIMESTAMP_PREFIX}"
    finalize_efi_partition_and_unmount_if_desired
}
exit_zero_if_new_kernel_available() {
    # simple test - is the currently running kernel the same as the one
    # present in the staging area?
    # exit with code 0 if it is not (i.e., a new kernel IS available), or 1
    # if it is
    if [[ "${CURRENTVERSION}" != "${NEWVERSION}" && \
        (-s "${BOOTDIR}/${VMLINUZNAME}" || -s "${BOOTDIR}/${VMLINUZNAME}${SIGNEDSUFFIX}")]]; then
        cleanup_and_exit_with_code 0
    else
        # up to date, or no new kernel available, so th
        cleanup_and_exit_with_code 1
    fi
}
process_command_line_options() {
    local TEMP
    declare -i RC
    set +e
        # error trapping off, as we want to handle errors
        TEMP="$(getopt -o aAbcefhimpsuvxV --long ask,alert,snapshot-backup,clean,easy-setup,copy-from-staging,help,is-new-kernel-available,menuconfig,postclear,stage-only,verbose,unmount-at-end,rebuild-external-modules,version -n "${PROGNAME}" -- "${@}")"
        RC="${?}"
    set -e
    if ((RC!=0)); then
        display_usage_message_and_bail_out
    fi
    eval set -- "${TEMP}"

    # extract options and their arguments into variables.
    while true ; do
        case "${1}" in
            -a|--ask) ARG_ASK=1 ; shift ;;
            -A|--alert) ARG_ALERT=1 ; ARG_ASK=1 ; shift ;;
            -b|--snapshot-backup) ARG_SNAPSHOTBACKUP=1 ; shift ;;
            -c|--clean) ARG_CLEAN=1 ; shift ;;
            -e|--easy-setup) ARG_EASYSETUP=1 ; shift ;;
            -f|--copy-from-staging) ARG_COPYFROMSTAGING=1 ; shift ;;
            -h|--help) ARG_HELP=1 ; shift ;;
            -i|--is-new-kernel-available) ARG_IS_NEW_KERNEL_AVAILABLE=1 ; shift ;;
            -m|--menuconfig) ARG_MENUCONFIG=1 ; shift ;;
            -p|--postclear) ARG_POSTCLEAR=1 ; shift ;;
            -s|--stage-only) ARG_STAGEONLY=1 ; shift ;;
            -u|--unmount-at-end) ARG_UNMOUNTATEND=1 ; shift ;;
            -v|--verbose) ARG_VERBOSE=1 ; shift ;;
            -x|--rebuild-external-modules) ARG_REBUILD_EXTERNAL_MODULES=1 ; shift ;;
            -V|--version) ARG_VERSION=1 ; shift ;;
            --) shift ; break ;;
            *) die "Internal error!" ;;
        esac
    done
    # set verbosity
    if ((ARG_VERBOSE==1)); then
        VERBOSITY+=1
    fi
    if ((VERBOSITY>1)); then
        VERBOSITYFLAG="--verbose"
    fi
    # set interactive mode
    if ((ARG_ASK==1)); then
        ASKFLAG="--ask"
    fi
    if ((ARG_ALERT==1)); then
        ALERTFLAG="--alert"
    else
        suppress_alert
    fi
    internal_consistency_option_checks
    # process 'perform-then-exit' options
    if ((ARG_HELP==1)); then
        print_help
        cleanup_and_exit_with_code 0
    elif ((ARG_VERSION==1)); then
        print_version
        cleanup_and_exit_with_code 0
    elif ((ARG_EASYSETUP==1)); then
        interactively_set_buildkernel_config
        cleanup_and_exit_with_code 0
    fi
    setup_final_variables
    if ((ARG_SNAPSHOTBACKUP==1)); then
        snapshot_kernel_on_efi_partition
        cleanup_and_exit_with_code 0
    elif ((ARG_IS_NEW_KERNEL_AVAILABLE==1)); then
        exit_zero_if_new_kernel_available
    fi
}

# *************** start of script proper ***************
suppress_colour_and_alert_if_output_not_to_a_terminal
check_if_booted_under_efi
find_all_usb_partitions
source_etc_conf_file
process_command_line_options "${@}"
ask_whether_to_proceed

check_gcc_config_and_reset_if_necessary
if_option_unset "ARG_STAGEONLY" ensure_efi_partition_mounted
if ((ARG_COPYFROMSTAGING==0)); then    
    enter_build_directory
    check_if_deblobbing
    copy_config_from_proc_if_necessary
    conform_config_file
    allow_user_to_modify_config_graphically
    if_option_set "ARG_ASK" continue_yn "Now build a kernel with this new configuration"
    clean_kernel_tree_if_desired
    kernel_build_pass_1         # with empty initramfs
    rebuild_external_modules_if_necessary
    create_initramfs_using_genkernel
    unpack_initramfs
    modify_initramfs            # make sure our static gpg is in there!
    repack_initramfs
    kernel_build_pass_2         # with real initramfs
    sign_kernel_if_possible     # if key/certificate available, for secure boot
fi
if ((ARG_STAGEONLY==0)); then
    purge_old_backup_kernel_and_config_if_present
    check_if_enough_disk_space_for_backups
    backup_prior_efi_kernel_if_present
    backup_prior_config_if_present
    copy_new_efi_kernel_to_efi_partition
    copy_new_config_to_efi_partition
    conform_efi_boot_order_if_possible
    finalize_efi_partition_and_unmount_if_desired
fi
display_final_status
cleanup_and_exit_with_code 0
# **************** end of script proper ****************