C07:Tagestemperatur_HK1 missing

[Fl77777]

the Topic ...C07:Tagestemperatur_HK1 is missing and this would be the most important parameter for me to manipulate.
...C13:Tagestemperatur_HK2 is recognized and can also be manipulated.
My configuration of the base.xml is:
<tns:Unit id="mySolvis" type="SolvisMax6"
mainHeating="Extern" heatingCircuits="2" fwLth2_21_02A="false"
Learning is done without any error messages with Configuration mask: 0x100002b
Any ideas?

[Fl77777]

I think there might be a mistake in control.xml in line 2644 that becomes appearent with a heating system with 2 heating circuits:

			<tns:ConfigurationMask andMask="0x07"
				compareMask="0x01" />

It should be 0x01 instead of 0x07. Otherwise C07 is not set in a 2 circuit heating system. Changing it to 0x01 solved the issue for me.

[GollmerSt]

I have to reopen this issue because I don't understand the background of this problem. The workaround above may not be entirely correct.

When developing the SolvisSmartHomeServer, I only had one system with one heating circuit available.
I was then able to evaluate the program with a user using a system with 3 heating circuits. I haven't been able to test it with two heating circuits yet.

In the case of a system with 3 heating circuits, the home screen looks like this:

What does the home screen look like for a system with 2 stations?

[Fl77777]

Hi, the home screen with two heating circuits looks like this.

[GollmerSt]

I've now looked at the configuration file again. You were right, your change should solve the problem, thank you very much. For the other settings - like night temperature - I already had it correct in the configuration.xml.

I will provide a fixed package in the next few days. This will be the only change in the package.

[Fl77777]

Hi,
Thank you very much. I would like to mention that I also had to change this section (lines 3014 and 3015 in control.xml)

<tns:ChannelDescription id="C17" unit="°C">
tns:Configuration
<tns:ConfigurationMask andMask="0x04"
compareMask="0x04"/>

to

tns:ConfigurationMask andMask="0x01"
compareMask="0x01"/>

for my system to recognize C17 as an adjustable parameter.
Whilst you are at it, could you maybe have a look if this change is correct for any heating system configuration.

Thank you!

[GollmerSt]

This is also a bug, Vorlauf_Soll_HK2 would only be adjustable with 3 heating circuits.

From my point of view, the following setting would be correct:

tns:Configuration
<tns:ConfigurationMask andMask="0x02"
compareMask="0x02" />
</tns:Configuration>

Otherwise this would also be carried out for one heating circuit.

Could you try this entry?

Many thanks.

[Fl77777]

You are right, 0x01 would not be correct for a system with only one heating circuit. For my system with 2 heating circuits (logical and with 1011) it also works with
<tns:ConfigurationMask andMask="0x02"
compareMask="0x02" />
Thank you very much. Its a great interface and has been working very reliably once I had fixed these two little issues.